Hello,
I have just downloaded ROM from my stock EVO 8. This ROM is not recognized by EcuFlash. If I use other EVO8 xml as template I got wrong results, maps seems OK, but units in tables like RPM or Load are wrong. I am attaching my ROM. Can you help me please crate correct XML definition? Thank you.
European EVO 8 2004
5 posts
• Page 1 of 1
European EVO 8 2004
by Ladis » Mon Jun 12, 2006 10:38 am
- Attachments
-
evo8.bin- Stock european 2004 EVO 8
- (256 KiB) Downloaded 809 times
- Ladis
- Posts: 9
- Joined: Mon Jun 12, 2006 10:24 am
by mlr » Tue Jun 20, 2006 1:58 pm
Compared this ECU with mine (EDM EVO8 2004) -the same except 3FFCE -i suppose its immobiliser.
Exchanged injectors to 780cc and changed injector scailing - IT WORKS!-TNKX Colby!!! Great device!!!
But i hope to finds correct axis numbers for some boost control and injector latency tables.
Also there is a question where to find MAF(MAV) calibration table - i'd like to know what is the top mav reading this ecu can handle....
As i suppose-it reads mav impulses between CAS - an it is engine load...So then at high RPM is capable for higher MAF(V) readings , then on low, right?
Exchanged injectors to 780cc and changed injector scailing - IT WORKS!-TNKX Colby!!! Great device!!!
But i hope to finds correct axis numbers for some boost control and injector latency tables.
Also there is a question where to find MAF(MAV) calibration table - i'd like to know what is the top mav reading this ecu can handle....
As i suppose-it reads mav impulses between CAS - an it is engine load...So then at high RPM is capable for higher MAF(V) readings , then on low, right?
- mlr
- Posts: 15
- Joined: Mon Dec 26, 2005 1:33 am
- Location: Moscow, Russia
5 posts
• Page 1 of 1
Return to Mitsubishi (all models)
Who is online
Users browsing this forum: No registered users and 26 guests