Help with 2008 lancer CVT turbo conversion

Help with 2008 lancer CVT turbo conversion

Postby devojet » Thu Mar 29, 2012 6:32 pm

I have a 2008 lancer CVT NA which is currently being fitted with a turbo. I have ordered an openport 2, but have to wait for it to arrive. Can anyone help me with what XML file is required and what I would need to change to allow me to tune the fuel and timing for boost. The plan is to only run 5psi boost.

Thanks

Daniel.
devojet
 
Posts: 3
Joined: Tue Mar 27, 2012 7:47 pm

Re: Help with 2008 lancer CVT turbo conversion

Postby boymay22 » Fri Mar 30, 2012 12:16 am

Turbo for cvt is very bad. Standby a gearbox.
boymay22
 
Posts: 14
Joined: Sun Jun 12, 2011 10:10 pm

Re: Help with 2008 lancer CVT turbo conversion

Postby devojet » Sat Mar 31, 2012 3:59 pm

I have told the owner that but they want the turbo anyway. I'm just tuning it.

From the reading I have done it looks as though I need to use the evo x rom in the stock computer with an evo x MAP sensor. But that will still leave me with a check engine light that no one seems to know how to fix. Can anyone tell me if Im on the right track here?

Thanks Daniel.
devojet
 
Posts: 3
Joined: Tue Mar 27, 2012 7:47 pm

Re: Help with 2008 lancer CVT turbo conversion

Postby LiX » Wed Sep 26, 2012 2:43 am

Yes, you will need 3 bar Evo X map sensor, cause stock one is not reading boost. Also with Evo X ROM you will have CEL and MIVEC will be disabled.

If you don't want to have CEL you will have to install aftermarket piggy-back ECU - AEM FIC8
LiX
 
Posts: 3
Joined: Wed Apr 07, 2010 1:04 pm


Return to Mitsubishi (all models)

Who is online

Users browsing this forum: Bing [Bot] and 9 guests