Hey guys, I posted my '99 Galant V6 (cali spec) ROM on Galant Tuners awhile ago, and mystic_j was able to create a definition for me, with the exception of certain components. These components aren't showing up in EcuFlash correctly at all. I just learned MATLAB coding over the past two quarters of school, but am completely new to hex, so I really don't know anything about it except maybe what you could possibly learn in a one page article about it. I believe this definition was written basically using a 2000 Eclipse ROM, and modified to suit the Galant? Anyway.. that said, I need help with the following tables:
Injector Latency
MAF Scaling
MAF Smoothing
Desired Idle RPM (drive)
Desired Idle RPM (neutral)
What's important for me right now is Injector Latency and the MAF tables, as I would like to scale my injectors soon. I will state right now that when you try to change the values in the Desired RPM tables, the last two RPM values of the Neutral table are dependent on the first two values of the Drive table, so something is very obviously wrong (in addition to the numbers being out of wack).
Note that the two tables on the right are actually different tables I had open by accident. Just pay attention to the "844" RPM values on the left.
I have attached the definition and ROM files. Also note that I had to manually enter in the axis values for the Fuel and Timing tables, if that makes any difference.
Any help would be much much appreciated.
-Adrian
EDIT/UPDATE
I have attached a newer ROM that I pulled more recently in a post down below. I believe the ROM in this post might have some wrong information since I changed some values and am not sure if this affected any mis-assigned values. I just want to be sure so I'm starting with a fresh ROM again. So basically, don't download the ROM in this post if you're going to be looking at it to edit the definition that I posted.