Page 1 of 1
XML for 2006 Lancer Ralliart 2.4L
Posted:
Fri Jan 28, 2011 11:08 amby CorrPerformance
I been reading countless thread trying to find the definitions for this car with no luck. I need it so I can tune one of my clients vehicle and it pains me to start a thread if somewhere the definition can be found for this vehicle.
Here I send the link to the HEX/BIN file
http://www.box.net/shared/k2i0maxjroThanks in advance to whomever is able to help me out in this dire situation.
Alberto
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Sun Jan 30, 2011 6:31 amby CorrPerformance
Let me know if any one has downloaded the file and started looking at it. Thanks!
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Sun Jan 30, 2011 8:23 pmby Mitsiman
The software is currently unable to flash this model ECU its not workign properly, which is also why there is no working definition file yet.
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Mon Jan 31, 2011 8:08 amby CorrPerformance
Correct, I updated to the latest ecuflash version and downloaded all the definitions on this model that I could find and still nothing. The client was telling me that this model was being flashed on puerto rico. Dont know how true is that. Any way now my issue is this, need to make some changes to a evolution 8 rom on tephra and when I try to open that rom, the ecuflash crashes. I have release the tephra definitions to the rom data folder and no success. Any recommendations?
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Wed Feb 02, 2011 12:10 amby Mitsiman
If its crashing you have a conflict with your defintiion files. or you are using a definiton file that is looking for some coding that isn't there.
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Wed Feb 02, 2011 6:29 amby CorrPerformance
Would uninstalling this version and dropping down to the previous version fix the issue? Of course with loading the Tephra defintions that were there before.
Thanks for the reply Mitsuman
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Fri Feb 04, 2011 4:57 amby todd-w
corrupt def file will cause that too remove the last xml you put in or edited and try then
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Fri Feb 04, 2011 6:01 amby CorrPerformance
Thanks, Todd-w will try that and let you know what happens.
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Mon Feb 21, 2011 5:09 amby CorrPerformance
I installed the version I had previously in a different Folder, put the tephra definitions back in the ROM folder and it worked.
On saturday I had to reflash a Evo 8 and the latest version of EcuFlash and the 2.0 tactric cable and would not work well with the Evo 8 I had at the shop. I opened the version 1.42.2595 took out my 1.3 cable (had a spare one) and all worked accordingly. So dont know what is going on with the Evo 8 and the new version of EcuFlash since on a 2009 Ralliart i was working with the 2.0 cable and new version of the software with no issues.
Re: XML for 2006 Lancer Ralliart 2.4L
Posted:
Mon Feb 21, 2011 5:16 amby CorrPerformance
Getting back to OP Mitsuman said
The software is currently unable to flash this model ECU its not workign properly, which is also why there is no working definition file yet.
There is a guy by the name of Hackish that is flashing these ecus. So it is possible.
http://www.youtube.com/watch?v=UcYt-GFyBhE&NR=1http://www.youtube.com/watch?v=JhJdNsc-sWcSo there are methods of doing this reflash to this engine. Interesting.