Page 1 of 1
Definition needed for 2008 ADM EVO X SST
Posted:
Tue Dec 07, 2010 12:09 am
by RS200Z
Hi there, appreciate if someone can provide the XML for the above mentioned EVO X model.
Attached is the ROM file.
Re: Definition needed for 2008 ADM EVO X SST
Posted:
Tue Dec 07, 2010 2:11 pm
by ptharris
here you go
Re: Definition needed for 2008 ADM EVO X SST
Posted:
Tue Dec 07, 2010 6:45 pm
by RS200Z
Thanks, it worked!
Re: Definition needed for 2008 ADM EVO X SST
Posted:
Thu Dec 09, 2010 7:13 pm
by RS200Z
Hi, I realized the value for the following 3 tables are all 159.4 which looks weird compared to a 2008 JDM EVO X SST. Can I check if it's due to a problem with the XML addressing the wrong address/table?
- Boost Target Engine Load #1A (High Gear Range)
- Boost Target Engine Load #1B (High Gear Range)
- Boost Target Engine Load #2 (Low Gear Range)
Re: Definition needed for 2008 ADM EVO X SST
Posted:
Sat Dec 11, 2010 12:27 am
by ptharris
some one has changed that rom, i mapped a std 53050006 yesterday and the rom is fine
See attached
Re: Definition needed for 2008 ADM EVO X SST
Posted:
Sun Dec 26, 2010 1:55 am
by zigzagzok
hi can anyone help?
despite the definition file below, there are still some tables not defined yet...
much thanks in advance!
open loop load low octane #1 and #2
reactive solenoid wgcd correction interval (high.low gear)
reactive solenoid max total upward wgdc correction
reactive solenoid max total downward wgdc correction
boost control rpm per mph xover
also cant seem to fine open looop vs close loop toggle