Page 1 of 1
4G93 ECUFLASH
Posted:
Tue Sep 28, 2010 4:00 pm
by betogt
HI, I ALSO HAVE A MITSUBISHI MIRAGE LS COUPE 4G93, I JUST OVERHAULED THE ENGINE AND IT HAS A COMPRESSION OF 225 PSI. SO I WANT TO FLASH MY ECU, BUT THIS CAR DOESNT HAS ANY OTHER PORT FOR THE TACTRIX CABLE, SO I HAVE UNDERSTOOD THAT THE TACTRIX PORT HAS TO BE TAKEN FROM THE ECU, BUT I DONT KNOW WHAT PIN OR PINS SHOULD I HAVE TO CONNECT TO IT. IF YOU COULD HELP ME ILL APPRECIATE!!! THANK YOU VERY MUCH FOR YOUR TIME!!!
Re: 4G93 ECUFLASH
Posted:
Fri Oct 01, 2010 3:19 pm
by todd-w
what year ? metal or plastic ecu case , try a wire to pin 79 at ecu for the white init socket .
Re: 4G93 ECUFLASH
Posted:
Sat Oct 02, 2010 10:22 am
by betogt
its a 99 mirage!!! plastic case
Re: 4G93 ECUFLASH
Posted:
Sun Oct 03, 2010 1:44 pm
by todd-w
put a wire into pin 79 at the ecu and connect to the single wire white connector on tactrix cable
Re: 4G93 ECUFLASH
Posted:
Thu Oct 07, 2010 4:18 pm
by betogt
ok thank you very much!!!!