Did you connect the flash connector to the right port? I have tried 3 Airtreks so far and haven't had any issues, I had to DE-Pin the flash connector and wire it to the airtreks, since it uses a different connector from other mitsubishi's
HI, scientist I DIDNT CONNECT THE FLASH SOCKET ... I DON'T KNOW HOW TO BY PASS THE FLASH CONNECTOR . NOW I'M USING TACTRIX 2.0 . I HAVE CHECK FORUM POST THIS CONNECTOR BEFORE .. BUT THEY DIDNT SHOW HOW TO CONNECTOR TO CONNECT IT . SO I HOPE YOU CAN HELP ME ... THANKS ANY WHERE .. I'M WAITING YOUR ANSWER ..
if you look under there, you will see another large connector next to the OBD/MUT connector...it will only have one pin in it. I used another wire to put into that pin and connected it to the flash connector on the ECU flash