Definition File needed for Australian 4G94 Lancer

Definition File needed for Australian 4G94 Lancer

Postby Mitsiman » Tue May 05, 2009 2:37 am

Definition file from Mitsubishi Lancer with the 4G94 Lancer
Attachments
Lancer 4G94 ADM CH Stock.hex
(256 KiB) Downloaded 724 times
Mitsiman
 
Posts: 49
Joined: Tue Aug 12, 2008 4:06 am

Re: Definition File needed for Australian 4G94 Lancer

Postby acamus » Tue May 05, 2009 9:19 am

ROMID = 99730001
ECU Family = EM9973
SCC = E57C

Does it have MIVEC head?
acamus
 
Posts: 94
Joined: Tue Apr 15, 2008 3:56 am

Re: Definition File needed for Australian 4G94 Lancer

Postby acamus » Tue May 05, 2009 10:52 am

Here it comes
Attachments
99730001.xml
(4.06 KiB) Downloaded 756 times
acamus
 
Posts: 94
Joined: Tue Apr 15, 2008 3:56 am

Re: Definition File needed for Australian 4G94 Lancer

Postby Mitsiman » Tue May 05, 2009 5:00 pm

Thanks no this is for the baseline 4G94 SOHC 16v motor. Same as the ES Lancer in the USA 2003 - 2007 model.

I will give it a go thanks again
Mitsiman
 
Posts: 49
Joined: Tue Aug 12, 2008 4:06 am

Re: Definition File needed for Australian 4G94 Lancer

Postby Mitsiman » Wed May 06, 2009 7:03 pm

I have another 4G94 lancer ROm I flashed, which needs a new definition file.
Attachments
Lancer CS 2005 4G94.hex
(256 KiB) Downloaded 714 times
Mitsiman
 
Posts: 49
Joined: Tue Aug 12, 2008 4:06 am

Re: Definition File needed for Australian 4G94 Lancer

Postby acamus » Wed May 06, 2009 11:49 pm

ROMID = 98490000
ECU Family = JM9849
SCC = E57C
acamus
 
Posts: 94
Joined: Tue Apr 15, 2008 3:56 am

Re: Definition File needed for Australian 4G94 Lancer

Postby Mitsiman » Thu May 07, 2009 12:10 am

Acamas I am going to have to put you on my payroll at this rate :)

Let me know how you go with teh definition file.

Also secondly, for those that may know, many of these Mitsubishi vehcles are not running a knock sensor from factory. If we were to wire it in and somehow find the pin on the ECU, would the software automatically be able to utilise it or would we have to write a specific file to enable it?
Mitsiman
 
Posts: 49
Joined: Tue Aug 12, 2008 4:06 am

Re: Definition File needed for Australian 4G94 Lancer

Postby acamus » Thu May 07, 2009 12:12 am

Here it comes
Attachments
98490000.xml
(4.07 KiB) Downloaded 733 times
acamus
 
Posts: 94
Joined: Tue Apr 15, 2008 3:56 am

Re: Definition File needed for Australian 4G94 Lancer

Postby acamus » Thu May 07, 2009 12:14 am

There is more to knock than wire it in, unfortunately.
Where do I withdraw paycheck money? :)
acamus
 
Posts: 94
Joined: Tue Apr 15, 2008 3:56 am

Re: Definition File needed for Australian 4G94 Lancer

Postby Mitsiman » Sun Jun 07, 2009 5:17 pm

I have another model 4G94 needing a definition file. Thanks again to those who are helping.
Attachments
CS Lancer 2004 MT Stock Rom.hex
(256 KiB) Downloaded 669 times
Mitsiman
 
Posts: 49
Joined: Tue Aug 12, 2008 4:06 am

Re: Definition File needed for Australian 4G94 Lancer

Postby acamus » Mon Jun 08, 2009 11:11 am

You can use 2005 model definition just change the xml header and save as 94950001.xml

ROMID = 94950001
SCC = E57C
ECU Family = JM9495

Code: Select all
   
<romid>
      <xmlid>94950001</xmlid>
      <internalidaddress>f52</internalidaddress>
      <internalidhex>94950001</internalidhex>
      <make>Mitsubishi</make>
      <market>ADM</market>
      <model>Lancer</model>
      <submodel>4G94</submodel>
      <transmission>Manual</transmission>
      <year>2004</year>
      <flashmethod>mitsukernel</flashmethod>
      <memmodel>SH7052</memmodel>
   </romid>
acamus
 
Posts: 94
Joined: Tue Apr 15, 2008 3:56 am

Re: Definition File needed for Australian 4G94 Lancer

Postby Mitsiman » Mon Jun 08, 2009 10:46 pm

Thanks worked a charm.
Mitsiman
 
Posts: 49
Joined: Tue Aug 12, 2008 4:06 am

Re: Definition File needed for Australian 4G94 Lancer

Postby Mitsiman » Thu Jul 02, 2009 11:51 pm

I have another variation of the 4G94 this time an Auto model.

Would someone have a look at this one for me please thanks
Attachments
CG Lancer 4G94 Auto.hex
(512 KiB) Downloaded 641 times
Mitsiman
 
Posts: 49
Joined: Tue Aug 12, 2008 4:06 am

Re: Definition File needed for Australian 4G94 Lancer

Postby acamus » Fri Jul 03, 2009 12:03 pm

Same as above, save as 84970001.xml
Code: Select all
   <romid>
      <xmlid>84970001</xmlid>
      <internalidaddress>f52</internalidaddress>
      <internalidhex>84970001</internalidhex>
      <make>Mitsubishi</make>
      <market>ADM</market>
      <model>Lancer</model>
      <submodel>4G94</submodel>
      <transmission>Auto</transmission>
      <year>2006</year>
      <flashmethod>mitsukernel</flashmethod>
      <memmodel>SH7055</memmodel>
   </romid>
acamus
 
Posts: 94
Joined: Tue Apr 15, 2008 3:56 am

Re: Definition File needed for Australian 4G94 Lancer

Postby HsamehH » Sun Apr 11, 2010 7:20 am

hi acamus, I have this one too from manual 4g94 lancer but ecuflash can't open it with this xml's :(
Attachments
4g94stock.hex
(256 KiB) Downloaded 630 times
HsamehH
 
Posts: 18
Joined: Sun Feb 01, 2009 10:31 am

Next

Return to Mitsubishi (all models)

Who is online

Users browsing this forum: No registered users and 60 guests