06 Eclipse 4cyl AT

06 Eclipse 4cyl AT

Postby itp » Thu Feb 05, 2009 5:27 am

I tried pulling the ROM from an 06 (prod. date 3/06)USDM 4cyl AT Eclipse. I am using 2.0 cable and 1.41Ecuflash. It did not seem to initialize. It tried 3 diff(0001,0003,ffff) init. codes and all failed. In the car type menu the 1.41 software has the 06 eclipse AT listed already. I tried 06+ CAN Mitsu as well. No dice. Other thing is that I did not see the secondary (initialization?) connector. Maybe this is the problem. I checked everywhere under the drivers side of the dash. Does it have one or did I miss it? Going to be adding a turbo kit assuming that I can tune the thing.
itp
 
Posts: 29
Joined: Wed May 17, 2006 9:13 am

Re: 06 Eclipse 4cyl AT

Postby todd-w » Thu Feb 05, 2009 10:56 am

its usually taped to the loom just above the obd plug .
todd-w
 
Posts: 330
Joined: Tue Nov 14, 2006 3:01 pm
Location: Ireland

Re: 06 Eclipse 4cyl AT

Postby eshugo » Fri Feb 18, 2011 4:25 pm

So I know this post is over two years old but I can't seem to find it either.

Any help would be appreciated.
eshugo
 
Posts: 1
Joined: Fri Feb 18, 2011 4:13 pm


Return to Mitsubishi (all models)

Who is online

Users browsing this forum: No registered users and 9 guests