Page 1 of 1

Pajero/montero DID

PostPosted: Mon Jan 12, 2009 1:17 am
by mavtecnica
Hi All:
Here's the stock ROM from Mitsubishi Montero, Pajero, Triton 3.2 DID engine,4m41, couldn't open it with any program.
What hardware and software need to reflashing?
I have two ecu
Model Year 2002, ECU number MK386842, Microprocessor MH7203FA, Europe
MOdel Year 2005, ECU number MK386858, MicroprocessorMH8102F, Europe
Thanks
VE0406A.hex
4M41 year 2002
(500.86 KiB) Downloaded 992 times

Re: Pajero/montero DID

PostPosted: Mon Jan 12, 2009 1:00 pm
by acamus
DiD's use Bosch firmware afaik. Hope it helps.

Re: Pajero/montero DID

PostPosted: Mon Jan 12, 2009 2:02 pm
by christian_piasini
mavtecnica wrote:Hi All:
Here's the stock ROM from Mitsubishi Montero, Pajero, Triton 3.2 DID engine,4m41, couldn't open it with any program.
What hardware and software need to reflashing?
I have two ecu
Model Year 2002, ECU number MK386842, Microprocessor MH7203FA, Europe
MOdel Year 2005, ECU number MK386858, MicroprocessorMH8102F, Europe
Thanks
The attachment VE0406A.hex is no longer available



You are loooking for a solution already exist from log time, right now... Serial Suite Piasiniengineering..

from 2000 to 2009 Pajero Did engine 4M41 and others too.

Best regards

Christian Piasini
R&D Piasiniengineering

Re: Pajero/montero DID

PostPosted: Sun Jan 18, 2009 9:24 am
by mavtecnica
Hi:
nobody knows about this ecu?

Re: Pajero/montero DID

PostPosted: Tue Feb 17, 2009 12:34 am
by Gatecrasher
I think I have an idea about the file you posted. I won't be able to look at it right away, but I may have something that will help you out.

Re: Pajero/montero DID

PostPosted: Tue Feb 17, 2009 1:10 am
by mavtecnica
Gatecrasher wrote:I think I have an idea about the file you posted. I won't be able to look at it right away, but I may have something that will help you out.

I hope your news, thank you

Re: Pajero/montero DID

PostPosted: Tue Mar 03, 2009 5:22 am
by Gatecrasher
I am sorry to make you wait for this. There was more work than I expected.

I have removed your ROM file from the one you posted. The file you have is sort of like a shell, and your engine's ROM was inside.

I will still try to make a basic definition file for ECUFlash. This will be hard because I do not know much about diesel. Perhaps there are others that can help you now that the ROM has been recovered.

Re: Pajero/montero DID

PostPosted: Tue Mar 03, 2009 7:17 am
by mavtecnica
Gatecrasher wrote:I am sorry to make you wait for this. There was more work than I expected.

I have removed your ROM file from the one you posted. The file you have is sort of like a shell, and your engine's ROM was inside.

I will still try to make a basic definition file for ECUFlash. This will be hard because I do not know much about diesel. Perhaps there are others that can help you now that the ROM has been recovered.

Thank you very much.

Re: Pajero/montero DID

PostPosted: Tue Mar 09, 2010 11:10 am
by acamus
Gatecrasher wrote:I am sorry to make you wait for this. There was more work than I expected.

I have removed your ROM file from the one you posted. The file you have is sort of like a shell, and your engine's ROM was inside.

I will still try to make a basic definition file for ECUFlash. This will be hard because I do not know much about diesel. Perhaps there are others that can help you now that the ROM has been recovered.


You have it wrong it is 384kB and you are missing something from beginning of the ROM and a lot from the end.
Sorry for bringing this dead thread back.

Re: Pajero/montero DID

PostPosted: Thu May 13, 2010 11:49 pm
by remapping
Interesting.
Any more experiences trying to access bigger Mitsubishi DID's with Ecuflash?

Re: Pajero/montero DID

PostPosted: Fri Jan 07, 2011 1:10 pm
by powertdi
Who knows which software can I read flash from ECU? Pajero 3,2DID ( 4m41). It has a not bosch EDC16. ECU is mitsubishi electronics 8631a261 , G1T32774H

Re: Pajero/montero DID

PostPosted: Tue Jan 11, 2011 1:35 am
by Mitsiman
This is a definitly something I would be interested in researching furhter. There are a lot of diesel stuff happening now in the Mitsubishi range and would be great to have something to work with on them.

Re: Pajero/montero DID

PostPosted: Wed Mar 02, 2011 1:25 pm
by powertdi
This ECU still not read. I can find a hardware which can read this type processor. MH8102f 630c106
This is a 3.2 DI-D 2007. In attachement pictures of PCB. I hope some one from this forum has experince with same ECU.

Re: Pajero/montero DID

PostPosted: Sun Mar 06, 2011 9:53 pm
by acamus
The processor is Renesas m32r series, its ROM size is 384kB.
Here is what I have extracted from rpg file posted above.
I hope it helps you :)