Evo 5 RS Rom

[gteclass]

barry, are you having problems with reading the rom at all?

When I try to read my rom from my 2000 Eclipse v6 it only does an init sequence 2 and stops. Does yours run more than one init when it reads and does it start with 1?

[cossie1]

How you getting on with the definiation file barry ?

Can't wait for my cable to arrive.

Seems to be stuck in customs atm

[BarryC.]

barry, are you having problems with reading the rom at all?

When I try to read my rom from my 2000 Eclipse v6 it only does an init sequence 2 and stops. Does yours run more than one init when it reads and does it start with 1?

will check it out for ya later but it downloaded first time no problems!!

[gteclass]

here is the rom for the H8 2000 elipse v6 and its definition file. The addresses in the def file have to be offset by 10000hex. So if the table is at 115c in our .hex file, the definition should think it is at 1115c. If it is at 1115c in our hex file, the definition should point to 2115c.

See Hardware Manual P.509(P.523 in pdf file) Table 18-4