ROM - 88580014 EVO 9, EDM, Manual, SH7055

ROM - 88580014 EVO 9, EDM, Manual, SH7055

Postby tango » Fri Dec 01, 2006 5:51 pm

would anyone know or have the XML file of this evo9 EDM 88580014? thanks guys
tango
 
Posts: 7
Joined: Thu Nov 23, 2006 8:51 am

Sorry

Postby mtcavity » Fri Dec 01, 2006 10:30 pm

I had this one but never applied it to the uploads, sorry about the delay.
Attachments
05_LANCER_EVO9_EDM_88580014 - XML - ROM.rar
(114.68 KiB) Downloaded 476 times
User avatar
mtcavity
 
Posts: 103
Joined: Sat Aug 12, 2006 11:23 am
Location: Northampton, PA

Postby tango » Sat Dec 02, 2006 12:37 am

why not? what happened?
tango
 
Posts: 7
Joined: Thu Nov 23, 2006 8:51 am

Postby ralliart » Sat Dec 02, 2006 1:01 am

Why you don't use this : http://forums.openecu.org/viewtopic.php?t=1301

Match perfectly with IX euro :D
ralliart
 
Posts: 15
Joined: Fri Sep 01, 2006 10:58 am

Postby tango » Sat Dec 02, 2006 2:05 am

just to confirm i will use those files, including the stock file as a base, then after altering the parameters i will up load that?
tango
 
Posts: 7
Joined: Thu Nov 23, 2006 8:51 am

What happened.

Postby mtcavity » Sat Dec 02, 2006 9:32 pm

I did not post because ralliart had original post. I found Boost Enhancement Maps (ignition and fuel) and have the maps posted in the version above, which is the only difference between XMLs.

Other than that the XML is originally ralliart's, while I just added to it.
User avatar
mtcavity
 
Posts: 103
Joined: Sat Aug 12, 2006 11:23 am
Location: Northampton, PA

Postby aalzuhair » Mon Jun 04, 2007 2:11 am

I worked on this file for some time now. It works well but some of the fileds are still wrong and needs to be worked on (i.e. MAP, ASL, MUT, ECU Periphery). I'm trying to make it perfect :)

Thank you for your input,

Az
Attachments
88550014 and MAP.zip
(130.26 KiB) Downloaded 344 times
aalzuhair
 
Posts: 1
Joined: Fri Apr 13, 2007 3:30 pm

Postby Settdimisti » Tue Jul 03, 2007 11:33 pm

can you guys see the stationary rev limit properly with these hex files? i dont think i get the right values
Settdimisti
 
Posts: 4
Joined: Wed Jun 28, 2006 10:45 pm

Postby SkyNight » Sun Aug 05, 2007 1:35 pm

Settdimisti wrote:can you guys see the stationary rev limit properly with these hex files? i dont think i get the right values


Both are perfect...
SkyNight
 
Posts: 10
Joined: Sat May 13, 2006 10:30 am
Location: Italy

Postby SkyNight » Sat Aug 11, 2007 5:15 am

MAF Scaling

Change scaling to AirFlow8
SkyNight
 
Posts: 10
Joined: Sat May 13, 2006 10:30 am
Location: Italy


Return to Mitsubishi (all models)

Who is online

Users browsing this forum: No registered users and 53 guests