06 Impreza EU 2.0 NonTurbo read ECU help Needed

06 Impreza EU 2.0 NonTurbo read ECU help Needed

Postby asids » Wed Jun 29, 2011 5:31 am

Hello all,

I have problem to read ECU info from Impreza 2006 EU 2.0 Non turbo.

This car have problem with 2nd air pump and I would like to disable this DTC.

When I plug programming connector I have following response from car:

[11:53:06.531] J2534 API Version: 04.04
[11:53:06.531] J2534 DLL Version: 1.00.3147 Sep 3 2010 00:11:07
[11:53:06.531] Device Firmware Version: 1.11.3137
[11:53:06.531] Device Serial Number: TA0ZByPq
[11:53:07.000] VIN: JF1GD9LF36GXXXXXX
[11:53:07.125] CVN: 05665BE7
[11:53:07.218] interface close


If I do not plug programming connector then response is like :

[11:53:07.250] J2534 API Version: 04.04
[11:53:07.250] J2534 DLL Version: 1.00.3147 Sep 3 2010 00:11:07
[11:53:07.250] Device Firmware Version: 1.11.3137
[11:53:07.250] Device Serial Number: TA0ZByPq
[11:53:07.421] SSM2 init
[11:53:07.562] SSM2 ECU ID is 4344307206
[11:53:07.640] Requesting Seed...
[11:53:07.687] Sending Key...
[11:53:07.781] interface close
[11:53:07.796] interface close



Is it any idea how to read dump from this ECU?

Thanks for help,
Andris.
asids
 
Posts: 5
Joined: Sat Sep 27, 2008 1:08 am
Location: Riga,Latvia

Return to Subaru (all models)

Who is online

Users browsing this forum: No registered users and 13 guests

cron