Need help with an '09 GR8 STi JDM

Need help with an '09 GR8 STi JDM

Postby PCN 383 » Thu Sep 16, 2010 6:55 pm

Firsty I would like to say that if I had known about this site, I would not have been in the position I am in now. I have an '09 GR8 JDM STi, my problem lies with the parts I have to work with. I've got a USDM Cobb Tuning Access Port, and a JDM STi. I called Cobb, they said it won't work, and I should not bother. I finally got thru to JProva, they weren't much help. So my question is, will it work on my car? If I was to download the JProva software on to the USDM Access Port, will the ECU recognise it and take the reflash? Any assistance you guys can offer will be greatly appreciated.

Thank you,
Wes,
PCN 383
 
Posts: 1
Joined: Thu Sep 16, 2010 6:44 pm

Re: Need help with an '09 GR8 STi JDM

Postby radsdau » Sun Sep 19, 2010 8:09 pm

Hard to say without finding out what ECU and ROM is in your car. Sounds like it should work. To be sure, acquire an OpenPort2 cable with ECUFlash and read the ROM out, then post it. If you can't read it, it may be locked.
That's step 1; let us know when you've done that.
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm

Re: Need help with an '09 GR8 STi JDM

Postby madcanix » Fri Nov 12, 2010 12:41 pm

you won't happen to be from malaysia,actually the open port 2.0 can download the grb jdm sti
i have tuned a few with it before
madcanix
 
Posts: 3
Joined: Sat Aug 21, 2010 11:37 pm


Return to Subaru (all models)

Who is online

Users browsing this forum: Bing [Bot] and 14 guests

cron