LC-1 not reading properly

[ardevas09]

my LC-1 is logging AFR at 4.2 at idle, i've recalibrated and it does the same thing. Am i making some noob mistake?

[Justin 05 STi]

my LC-1 is logging AFR at 4.2 at idle, i've recalibrated and it does the same thing. Am i making some noob mistake?

Is this in LogWorks, the RomRaider logger, or?

Only thing I can think of is run the LM Programmer software to be sure it's set for gasoline.

Beyond that if you do heater and free air calibrations and it's still off it's got to be either the sensor or the controller.