any tuning or reflashing software out for the LGT yet?

any tuning or reflashing software out for the LGT yet?

Postby Rigos gt » Sun Feb 12, 2006 8:11 pm

im very curious! and would like another option besides the AP
Rigos gt
 
Posts: 5
Joined: Sun Feb 12, 2006 8:06 pm

Postby Freon » Mon Feb 13, 2006 9:37 am

1) Flashing software is not yet available. Once this is available, you can read and reflash the data to your ECU.

2) Once you can read out your ECU, someone will need to work through and build support for the format of the ROM (i.e. "find" the maps). Right now, Ecuedit has most of what is needed to define the ROM, but someone still needs to work it through. This really can't happen until #1 happens.

I would recommend spending some time giving the forums a good read.
Freon
 
Posts: 700
Joined: Thu Nov 17, 2005 5:50 pm
Location: Indianapolis, IN

Postby cboles » Mon Feb 13, 2006 9:38 am

It is not out yet. The reflashing part is done and works great. I am just working on some other software features to round out the tool right now.

Colby
cboles
Site Admin
 
Posts: 1233
Joined: Wed Dec 29, 2004 5:45 pm
Location: Seattle, WA

Postby Rigos gt » Mon Feb 13, 2006 6:59 pm

nice, kinda excited to try new things with the car, get it tuned a little better thanks for the comments all, link to the reflashing software?
Rigos gt
 
Posts: 5
Joined: Sun Feb 12, 2006 8:06 pm

Postby cboles » Mon Feb 13, 2006 8:07 pm

... the software isn't released yet.
cboles
Site Admin
 
Posts: 1233
Joined: Wed Dec 29, 2004 5:45 pm
Location: Seattle, WA

Postby Rigos gt » Mon Feb 13, 2006 9:18 pm

oh IC, NVM, i read the post too fast or something...browsing 4 different forums at once doesnt help
Rigos gt
 
Posts: 5
Joined: Sun Feb 12, 2006 8:06 pm

Postby BoxerFan » Thu Apr 06, 2006 2:30 pm

Hi,

Is the software released yet? If it isn't, is there any software already released that allows reading off the ROM, at least for analysis?

BTW, I noticed in this forum, there is a lot of mention of the green connectors, which I believe it's for the WRX. For the LGT DBW ECU, is this applicable also to read off the ROM?

One final Q, I was mucking around with simplecode to read off the ECU addresses, and I realized that the read address command (A0) always works, and the read address block command (A8 ) never works. I wonder why?

Thanks.

MY04 Aus Liberty 2.0GT
BoxerFan
 
Posts: 58
Joined: Fri Aug 12, 2005 5:56 am
Location: Southeast Asia (little red dot)

Postby Jaxx » Thu Apr 13, 2006 9:23 am

yes there are green connectors
on the left hand driver version they are at the top of the floor mat on the passenger side

my read work asfar as i can tell..
Jaxx
 
Posts: 8
Joined: Thu Jul 07, 2005 12:30 pm


Return to Subaru (all models)

Who is online

Users browsing this forum: No registered users and 9 guests