reflash question?

reflash question?

Postby edysdyno » Wed Nov 28, 2007 3:22 pm

:lol:

Recently I flash a sti 2007 and a wrx 2007 with no problems with the tactrix mitsubishi cable 1.3 but I tried with a wrx 2004 and cant' get in the computer. I plug the green cable behind the drivers seat and nothing happend. Do I need to plug anything else ?
let me know thanks
edy
edysdyno
 
Posts: 19
Joined: Sat Sep 23, 2006 11:23 am

Postby radsdau » Wed Nov 28, 2007 4:03 pm

I've not heard of green cable behind driver's seat; I expect 2 green connectors to be under dash. You've obviously used these before on the other cars you've done.
Depending on what country you're in, this probably uses the WRX02 method even though it's a 2004 model WRX; I believe only US 2004 models use the WRX04 method.
For reflashing you need the flash jumper block as well as the green connectors joined; this applies the 12V flash programming voltage.
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm

Re: reflash question?

Postby Alex Maroto » Mon Sep 16, 2013 7:44 pm

Hi

I have had trouble with two Canada/USA Limited STI 2.5 2007, sold in my country.

I tried two computers (Lenovo and Hitachi), two Open port 2.0, two operating systems XP and Win7), two ecuflash versions: 1.42.2595 and 1.44.3721 without success

I used to flash many cars from 2001 to 2013 with no problems at all, but I haven´t been able to flash those 2007 STI´s

The log data says: Interface closed: GRRRRR!!!!

I check the green connectors, the car does the self check routine (so they start the check procedure) but I haven´t been able to pull the OEM map

I didn´´t use the white block for those cars, I didn´t fine any place for it!

Any ideas?

[09:22:10.888] EcuFlash Version 1.44.3721
[09:22:10.888] OS Version Windows 7
[09:22:10.888] Qt Version 4.8.0
[09:22:10.903] 63 memory models read.
[09:22:10.903] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash1422595/rommetadata
[09:22:11.013] 354 ROM metadata models scanned.
[09:22:11.013] checksum module "subarudbw" loaded.
[09:22:11.013] checksum module "mitsucan" loaded.
[09:22:11.013] checksum module "mitsuh8" loaded.
[09:22:11.013] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.
[09:22:11.013] patch module "Mitsu CAN RAM Parameter Logging" loaded.
[09:22:11.013] flashing tool "wrx02" loaded.
[09:22:11.013] flashing tool "wrx04" loaded.
[09:22:11.013] flashing tool "sti04" loaded.
[09:22:11.013] flashing tool "sti05" loaded.
[09:22:11.013] flashing tool "mitsukernel" loaded.
[09:22:11.013] flashing tool "mitsukernelocp" loaded.
[09:22:11.013] flashing tool "mitsubootloader" loaded.
[09:22:11.013] flashing tool "shbootmode" loaded.
[09:22:11.013] flashing tool "shaudmode" loaded.
[09:22:11.013] flashing tool "subarucan" loaded.
[09:22:11.028] flashing tool "subarucand" loaded.
[09:22:11.028] flashing tool "mitsucan" loaded.
[09:22:11.091] J2534 API Version: 04.04
[09:22:11.091] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[09:22:11.091] Device Firmware Version: 1.12.3688
[09:22:11.091] Device Serial Number: TAf3sr9J
[09:22:11.091] interface close
[09:22:11.122] J2534 API Version: 04.04
[09:22:11.122] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[09:22:11.122] Device Firmware Version: 1.12.3688
[09:22:11.122] Device Serial Number: TAf3sr9J
[09:22:11.122] interface close
[09:22:11.153] J2534 API Version: 04.04
[09:22:11.153] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[09:22:11.153] Device Firmware Version: 1.12.3688
[09:22:11.153] Device Serial Number: TAf3sr9J
[09:22:11.153] interface close
[09:23:38.076] using metadata XML ID read_sti05 from file C:/Program Files (x86)/OpenECU/EcuFlash1422595/rommetadata/read templates/read_sti05.xml
[09:23:38.092] J2534 API Version: 04.04
[09:23:38.092] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[09:23:38.092] Device Firmware Version: 1.12.3688
[09:23:38.092] Device Serial Number: TAf3sr9J
[09:23:43.156] This action is unsupported for this ECU.
[09:23:43.156] interface close
[09:23:49.640] using metadata XML ID read_sti05 from file C:/Program Files (x86)/OpenECU/EcuFlash1422595/rommetadata/read templates/read_sti05.xml
[09:23:49.655] J2534 API Version: 04.04
[09:23:49.655] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[09:23:49.655] Device Firmware Version: 1.12.3688
[09:23:49.655] Device Serial Number: TAf3sr9J
[09:23:50.672] This action is unsupported for this ECU.
[09:23:50.672] interface close
[09:24:00.380] using metadata XML ID read_sti05 from file C:/Program Files (x86)/OpenECU/EcuFlash1422595/rommetadata/read templates/read_sti05.xml
[09:24:00.395] J2534 API Version: 04.04
[09:24:00.395] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[09:24:00.395] Device Firmware Version: 1.12.3688
[09:24:00.395] Device Serial Number: TAf3sr9J
[09:24:02.136] This action is unsupported for this ECU.
[09:24:02.136] interface close
[09:24:07.787] using metadata XML ID read_subarush7058can from file C:/Program Files (x86)/OpenECU/EcuFlash1422595/rommetadata/read templates/read_subarush7058can.xml
[09:24:07.818] J2534 API Version: 04.04
[09:24:07.818] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[09:24:07.818] Device Firmware Version: 1.12.3688
[09:24:07.818] Device Serial Number: TAf3sr9J
[09:24:09.169] This action is unsupported for this ECU.
[09:24:09.169] interface close
Alex Maroto
 
Posts: 20
Joined: Mon Apr 07, 2008 8:35 am
Location: Costa Rica

Re: reflash question?

Postby jaxscuby » Mon May 02, 2016 6:49 am

Recently I flash a sti 2007 and a wrx 2007 with no problems with the tactrix mitsubishi cable 1.3 but I tried with a wrx 2004 and cant' get in the computer. I plug the green cable behind the drivers seat and nothing happend. Do I need to plug anything else ?
let me know thanks
edy

well you need the flash block jumper for 2004-2005 wrx.
2007 is a CAN-bus and does not require a jumper block.
so why didn't know about the jumper block?

Ben
jaxscuby
 
Posts: 11
Joined: Sun Dec 03, 2006 3:20 pm


Return to Subaru (all models)

Who is online

Users browsing this forum: No registered users and 7 guests

cron