06' EDM Forester turbo

[radsdau]

Try reinstalling the drivers from scratch.

Disconnect the OpenPort hardware, then uninstall the drivers using Control Panel-Add/Remove Programs ("OpenPort USB Drivers").

In (for example) %Program Files%\OpenECU\ECUFlash there is a 'drivers' folder containging x86 and x64 drivers shipped with the installed version. Reconnect the OpenPort hardware and choose the above driver location when prompted.

This should at least guarantee the latest driver version and its associated files is/are installed.


NOTE: If you have other USB devices installed on your system that also use FTDI drivers, then perhaps they use an older driver version, which overwrites the latest OpenPort files. You may end up in a situation where only one device works at a time and you have to constantly uninstll/reinstall drivers. I'm not sure what the fix is for this; Colby may have some ideas. Perhaps renaming the OpenPort FTDI driver files or something.

[ecuflasher]

Tried on an early 2007 EDM Forester turbo... Same. No luck! ECU not yet supported.

Anyone managed to read the ECU yet?

[massaa]

Anyone managed to read the ECU yet?

Um, EDM 06 FXT? Yes, I read mine and it worked ok. I don't remember which option I used (or which version of ecuflash), but it worked without any problems.

[Freon]

1 MB file, that would be "SH-2 7058". You should be able to use the 05-07 US STI read method.

[whitescooby]

EDM 06 Forester 2.5XT DBW
I can read/write with Ecuflash 1.29.906 and edit with EcuEdit.

Its size is 1MB.

[ecuflasher]

For you guys who managed to download the ROM off a EDM 06', are your ECUs the same # as mine?

[KOTT]

Anyone managed to read the ECU yet?

Um, EDM 06 FXT? Yes, I read mine and it worked ok. I don't remember which option I used (or which version of ecuflash), but it worked without any problems.

what connectors do u connect to read it?

[ecuflasher]

Almost 3 yrs on and I wonder if there's sufficient progress on this ROM for me to try again Anyone?

[AWDNV]

Okay there is a second green test connector under the passenger kick panel near the door, near where the kick panel meets the carpet I know I had the same thing happen with mine so good luck! They both must be connected to work properly!