ecu flash not reading

User topics relating to software that provides a tuning UI to alter ECU code and data

Moderator: Freon

ecu flash not reading

Postby marcone » Wed Aug 21, 2013 1:06 am

After having problems with recognising the id now when I read it stops and says review the log.Can anyone shed any light on this problem please,here is the page details.
Many Thanks MARC



[09:52:56.296] EcuFlash Version 1.44.3721
[09:52:56.296] OS Version Windows XP
[09:52:56.296] Qt Version 4.8.0
[09:52:56.312] 63 memory models read.
[09:52:56.312] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash
[09:52:57.468] 1835 ROM metadata models scanned.
[09:52:57.468] checksum module "subarudbw" loaded.
[09:52:57.468] checksum module "mitsucan" loaded.
[09:52:57.468] checksum module "mitsuh8" loaded.
[09:52:57.468] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.
[09:52:57.468] patch module "Mitsu CAN RAM Parameter Logging" loaded.
[09:52:57.468] flashing tool "wrx02" loaded.
[09:52:57.468] flashing tool "wrx04" loaded.
[09:52:57.468] flashing tool "sti04" loaded.
[09:52:57.484] flashing tool "sti05" loaded.
[09:52:57.484] flashing tool "mitsukernel" loaded.
[09:52:57.484] flashing tool "mitsukernelocp" loaded.
[09:52:57.484] flashing tool "mitsubootloader" loaded.
[09:52:57.484] flashing tool "shbootmode" loaded.
[09:52:57.656] flashing tool "shaudmode" loaded.
[09:52:57.656] flashing tool "subarucan" loaded.
[09:52:57.656] flashing tool "subarucand" loaded.
[09:52:57.656] flashing tool "mitsucan" loaded.
[09:52:57.812] Using interface OpenPort 1.3 Universal TX2HfDun23eea4c54ed26d0e9fa870916041c01a7cf89825
[09:52:57.828] interface close
[09:52:58.140] Using interface OpenPort 1.3 Universal TX2HfDun23eea4c54ed26d0e9fa870916041c01a7cf89825
[09:52:58.156] interface close
[09:52:58.234] Using interface OpenPort 1.3 Universal TX2HfDun23eea4c54ed26d0e9fa870916041c01a7cf89825
[09:52:58.234] interface close
[09:54:21.468] using metadata XML ID read_wrxnonusdm from file C:/Program Files/OpenECU/EcuFlash/backup002/rommetadata/read templates/read_wrxnonusdm.xml
[09:54:21.562] Using interface OpenPort 1.3 Universal TX2HfDun23eea4c54ed26d0e9fa870916041c01a7cf89825
[09:54:30.375] denso02_bootloader_cmd_start
[09:54:31.593] denso02_bootloader_cmd_start
[09:54:32.812] denso02_bootloader_cmd_start
[09:54:34.031] denso02_bootloader_cmd_start
[09:54:35.250] denso02_bootloader_cmd_start
[09:54:35.671] kernel get version
[09:54:36.000] interface close
[09:54:36.000] interface close gnising the id now when I read it stops and says review the log.Can anyone shed any light on this problem please,
marcone
 
Posts: 3
Joined: Tue Aug 20, 2013 10:22 am

Re: ecu flash not reading

Postby marcone » Thu Aug 22, 2013 12:03 pm

found out what it was it was the other data connector now reads fine
marcone
 
Posts: 3
Joined: Tue Aug 20, 2013 10:22 am


Return to Tuning Software

Who is online

Users browsing this forum: No registered users and 6 guests

cron