Page 1 of 4

Colt czt definitions

PostPosted: Sun Feb 22, 2009 11:28 am
by Marmes
Does anyone has the xml file for a colt czt?

Re: Colt czt definitions

PostPosted: Thu Feb 26, 2009 1:41 am
by acamus
ROMID = 47110032
ECU Family = JM4711
SCC = E234

I will see what can be done

Re: Colt czt definitions

PostPosted: Thu Feb 26, 2009 5:26 pm
by Marmes
Thank you very much :D

Re: Colt czt definitions

PostPosted: Fri Feb 27, 2009 3:30 pm
by peps_sti
How have you downloaded it?

Re: Colt czt definitions

PostPosted: Mon Mar 02, 2009 3:18 pm
by christian_piasini
PEP-STI, Marmes is in the same boat as you... ;-)


the file was my gift same to you for the 2.4L Outlander.

Christian Piasini
R&D Piasiniengineering

Re: Colt czt definitions

PostPosted: Mon Mar 02, 2009 4:07 pm
by Marmes
Yes,
The file was a kind gift from Christian, that tuned my car and made a very happy guy :)
This is the original file read by Piasini Tool, wich I strongly advise to give a check!


Cheers!

Re: Colt czt definitions

PostPosted: Sat Mar 14, 2009 6:46 pm
by coltcztowner
acamus wrote:ROMID = 47110032
ECU Family = JM4711
SCC = E234

I will see what can be done


Any news?

Not sure if the maps below are correct:

3 timing maps:
High octane timing 1 - 535DD
low octane timing 1 - 536F5
High octane timing 2 - 538D5
low octane timing 2 - 539ED
High octane timing 3 - 53BCD
low octane timing 3 - 53CE5

fuel maps:
High octane fuel - 53EC5
low octane fuel - 53FAD

Re: Colt czt definitions

PostPosted: Mon Mar 16, 2009 3:08 pm
by coltcztowner
Timing maps are 16x17
rpm axis - 4EBFE
load axis - 4EC24

fuel maps are 14x16
rpm axis - 4EBB6
load axis - 4EBD8

Re: Colt czt definitions

PostPosted: Mon Mar 16, 2009 10:32 pm
by acamus
I have done only fuel, the values above seem correct. I have not had enough time for timing
Warmup Map seems to be RPM 4F402(16), Load 4F42A(15), AFR 54997
Open Loop Load seems to be RPM 4EB80(14), Load 54406

Re: Colt czt definitions

PostPosted: Tue Mar 17, 2009 1:20 am
by coltcztowner
Waiting with patience... Thanks for your time.
If i find anything else, I'll post here. A lot of maps inside ROM!
Anybody knows the revlimit?
It would be great if we had an xml with basic stuff at the begining... And update it later on with new maps found.

Re: Colt czt definitions

PostPosted: Tue Mar 17, 2009 3:08 pm
by coltcztowner
I think mivec intake advance lays here: 5446F (16x15)
But i can not locate rpm and load axis.

Re: Colt czt definitions

PostPosted: Wed Mar 18, 2009 5:34 am
by acamus
axis for this map are at 4F024, 4F000

Re: Colt czt definitions

PostPosted: Wed Mar 18, 2009 2:16 pm
by Marmes
I am after the checksum of this.

Re: Colt czt definitions

PostPosted: Wed Mar 25, 2009 3:17 am
by coltcztowner
Another ignition map - 54665 (16x17)... looks like a warmup ignition map...?

Just after each couple of high and low octane ignition maps, there is another map which seems like an ignition trim for each couple.
5380D (16x12)
53B05 (16x12)
53DFD (16x12)
All three are exactly the same. Maybe EGR enabled ignition trims?

Re: Colt czt definitions

PostPosted: Wed Apr 01, 2009 3:01 pm
by coltcztowner
Just after each couple of high and low octane ignition maps, there is another map which seems like an ignition trim for each couple.
5380D (16x12)
53B05 (16x12)
53DFD (16x12)
All three are exactly the same. Maybe EGR enabled ignition trims?


for these maps: rpm axis 4EBFE, load axis 4ECEC.