we all eu people waiting for the def...
do you have an idea when will it created we bought the cable but cant flash our cars:(
Moderator: Freon
You could use Enginuity to modify/edit your ROM image on the PC and then use EcuFlash to write the modified/editted ROM image to your ECU.korhan wrote:we all eu people waiting for the def...
do you have an idea when will it created we bought the cable but cant flash our cars:(
That has been done with limited success. However, injector scalings, among other features, are not present in Enginuity.Jon [in CT] wrote:You could use Enginuity to modify/edit your ROM image on the PC and then use EcuFlash to write the modified/editted ROM image to your ECU.korhan wrote:we all eu people waiting for the def...
do you have an idea when will it created we bought the cable but cant flash our cars:(
http://www.enginuity.org/Documentation/SupportedECUs
ravenhil wrote:That has been done with limited success. However, injector scalings, among other features, are not present in Enginuity.
no sir! I was able to download a .hex file from my buddy's EDM 06 WRX in ecuflash but i get really wierd tables with x values that is not in ascending order. I get plenty of invalid tables too. Injector scaling is rated at 75000+ cc/min.merchgod wrote:ravenhil wrote:That has been done with limited success. However, injector scalings, among other features, are not present in Enginuity.
Umm, what? Injector scaling is most certainly supported in Enginuity.
You must set your Enginuity User Level to at least 3 in order to modify injector scale values.ravenhil wrote:When I used Enginuity, there are limited values.
Users browsing this forum: No registered users and 32 guests