Mitsubishi Evo4-EvoX and Subaru EvoScan Datalogging Project

User topics relating to software that logs data from ECUs

Moderator: Freon

Postby SilverBack » Fri Sep 15, 2006 6:23 am

Have just tested LM-1 integration.

As best as I can see, the AFR recorded in EvoScan mirrors what I see on the hardware display.

Data was logged successfully into EvoScan datalog.

Very nice - thank you. 8)
SilverBack
 
Posts: 45
Joined: Fri May 05, 2006 10:30 am

Postby 05 Evo » Fri Sep 15, 2006 3:39 pm

Evo4Mad,

I haven't had a chance to test this yet, but I have the LC-1 as well as Innovate's SSi4, which lets me log several other 0-5 V sensors.

One of the sensors that I have is a GM 3.3 Bar map sensor. I have the equations to get the pressure from the voltage, but I was wondering if EvoScan can read and log both the LC-1 and the GM 3.3 bar from the serial port in the same manner that Innovate's LogWorks does?

Thanks,
Eric
05 Evo
 
Posts: 6
Joined: Tue Apr 25, 2006 6:41 am

Postby Evo4Mad » Sat Sep 16, 2006 5:28 am

Sure thing [05Evo], just hook up your LC1 and external sensors, and log them to the csv file using v0.95 and send me the logs, and I can add external sensor logging support for these devices also. I think the LM1 I have can do external 0-5v sensors via this little black box and loads the readings back to the serial cable too, I just don't have any spare external sensors to hook up to it.
Evo4Mad
 
Posts: 332
Joined: Mon Jun 13, 2005 11:58 pm
Location: New Zealand

Postby danl » Sat Sep 16, 2006 9:03 am

Has anybody sent you LC1 files so that you can get that working?
danl
 
Posts: 26
Joined: Tue May 16, 2006 12:38 pm

Postby AutoXer » Sat Sep 16, 2006 9:39 am

danl wrote:Has anybody sent you LC1 files so that you can get that working?


I just sent some to him. I'm quite busy at the moment. I'm _at_ Mid-Ohio Sports Car Course right now.
AutoXer
 
Posts: 44
Joined: Thu Apr 13, 2006 3:27 am

Postby RallyCam » Sat Sep 16, 2006 1:37 pm

Evo4Mad wrote:I think the LM1 I have can do external 0-5v sensors via this little black box and loads the readings back to the serial cable too.
Did I send you that cable? I probably did. it wouldn't be hard to tap into the TPS for a 5v signal.
RallyCam
 
Posts: 14
Joined: Tue Apr 25, 2006 1:54 pm

Postby EvoKid » Sat Sep 16, 2006 11:01 pm

Evo4Mad wrote:Sure thing [05Evo], just hook up your LC1 and external sensors, and log them to the csv file using v0.95 and send me the logs, and I can add external sensor logging support for these devices also. I think the LM1 I have can do external 0-5v sensors via this little black box and loads the readings back to the serial cable too, I just don't have any spare external sensors to hook up to it.


I would love to use EVOSCan to log my 3.5 BAR AEM sensor hooked up to my Zetronix ZT2. Tell me what I need to do...
Thank you for all your effort
EvoKid
 
Posts: 7
Joined: Wed May 17, 2006 12:03 pm

Postby alwaysinboost » Sun Sep 17, 2006 6:01 am

EVO4MAD can you send me a copy of v.95 so I can use my lm1 w/rpm converter. I've tried everything and can't get my v.9 to work.

my email address is alwaysinboost at msn dot com.
alwaysinboost
 
Posts: 49
Joined: Mon May 08, 2006 5:38 pm

Postby Evo4Mad » Sun Sep 17, 2006 9:42 pm

Hey guys, I've just about finished v0.96, here are the main features.

Update v0.96
    - Calculated data value feature added - calculated values can be based on other log items using their current value.
    - Load added to the logs as a calculated data value.
    - Gear added as a calculated data value - used for the dashboard view.
    - Miles per gallon added as a calculated data value.
    - KMs per Litre added as a calculated data value.
    - GaugeFactor field added to data.xml - used for e.g. on the Rev counter gauge to display x1000rev/min
    - State Indicators feature added to gauge windows
    - Digital Gauges feature added to gauge windows
    - Log Run Editor - specify the log file and start/end times for each run. first stage to being able to compare and view log runs in the new graphing being developed.
    - Alarm Editor - allows criteria to be applied per data item logged, and a specific wav sound file to be played, any wav file from the \SoundFiles\ directory.
    - Wideband serial port logging - used for debugging
    -Innovate LC1 wideband logging support
Last edited by Evo4Mad on Mon Sep 18, 2006 3:21 am, edited 2 times in total.
Evo4Mad
 
Posts: 332
Joined: Mon Jun 13, 2005 11:58 pm
Location: New Zealand

Postby AutoXer » Mon Sep 18, 2006 1:55 am

Evo4Mad wrote:Update v0.96 - In Progress...
<--snip-->


No progress on LC1 datalogging? Did the logs I sent you help any?
AutoXer
 
Posts: 44
Joined: Thu Apr 13, 2006 3:27 am

Postby Evo4Mad » Mon Sep 18, 2006 3:04 am

nope i have only some logs from Leo.
Evo4Mad
 
Posts: 332
Joined: Mon Jun 13, 2005 11:58 pm
Location: New Zealand

no update

Postby Virdepax » Mon Sep 18, 2006 4:54 am

hey evo4mad I have 0.8 but I haven't recieved the update email yet.
Virdepax
 
Posts: 5
Joined: Sun Aug 13, 2006 12:43 am

Re: no update

Postby zlancerman » Mon Sep 18, 2006 6:40 am

Virdepax wrote:hey evo4mad I have 0.8 but I haven't recieved the update email yet.
Check your Junk/Spam folder. Most people have had his email flagged as spam.
User avatar
zlancerman
 
Posts: 24
Joined: Sun Jun 04, 2006 8:24 pm
Location: Michigan, USA

Postby Dapper_Dan » Mon Sep 18, 2006 1:27 pm

Evo4Mad wrote:Hey guys, I've just about finished v0.96, here are the main features.

Update v0.96
    - Calculated data value feature added - calculated values can be based on other log items using their current value.
    - Load added to the logs as a calculated data value.
    - Gear added as a calculated data value - used for the dashboard view.
    - Miles per gallon added as a calculated data value.
    - KMs per Litre added as a calculated data value.
    - GaugeFactor field added to data.xml - used for e.g. on the Rev counter gauge to display x1000rev/min
    - State Indicators feature added to gauge windows
    - Digital Gauges feature added to gauge windows
    - Log Run Editor - specify the log file and start/end times for each run. first stage to being able to compare and view log runs in the new graphing being developed.
    - Alarm Editor - allows criteria to be applied per data item logged, and a specific wav sound file to be played, any wav file from the \SoundFiles\ directory.
    - Wideband serial port logging - used for debugging
    -Innovate LC1 wideband logging support


awesome..........how soon will it be ready?
Dapper_Dan
 
Posts: 10
Joined: Wed Aug 30, 2006 2:53 pm

Postby drunk monkey » Mon Sep 18, 2006 1:32 pm

Evo4Mad wrote:Hey guys, I've just about finished v0.96, here are the main features.

Update v0.96
    - Calculated data value feature added - calculated values can be based on other log items using their current value.
    - Load added to the logs as a calculated data value.
    - Gear added as a calculated data value - used for the dashboard view.
    - Miles per gallon added as a calculated data value.
    - KMs per Litre added as a calculated data value.
    - GaugeFactor field added to data.xml - used for e.g. on the Rev counter gauge to display x1000rev/min
    - State Indicators feature added to gauge windows
    - Digital Gauges feature added to gauge windows
    - Log Run Editor - specify the log file and start/end times for each run. first stage to being able to compare and view log runs in the new graphing being developed.
    - Alarm Editor - allows criteria to be applied per data item logged, and a specific wav sound file to be played, any wav file from the \SoundFiles\ directory.
    - Wideband serial port logging - used for debugging
    -Innovate LC1 wideband logging support



nice.

dont know if this feature is added or not. but with the guages can we get some wording underneath saying what time of guage it is that is loggin. as i tend to forget..then when i right click to find out it shuts down the datalogging.


Thanks

Carlo
drunk monkey
 
Posts: 3
Joined: Tue Apr 25, 2006 2:28 pm

PreviousNext

Return to Data Logging Software

Who is online

Users browsing this forum: No registered users and 9 guests