by swifty » Tue Aug 08, 2006 2:17 am
You don't need to use the innovate software to log afr in ecu edit. This is my understanding of how it should work, epifan please correct me if I'm wrong:
If you have the latest version then open the Ecu logger from the menu. Once the logger is open, use the Connect to ecu option from the Connect menu to connect through the tactrix cable. Next, there is an option for external sensors off the Connect menu and this needs to be set to Innovate SDK. After that you need to click on the Configure sensors option and this brings up a window called Innovate Lambda config. Select the comm channel from the dropdown menu (probably com1 if using the serial cable direct to a serial port on your laptop) and the availablechannels will appear in the bottom half of the window. You want LM1-O2 for logging Lambda or AFR. Click Apply.
When all this is done you should be able to see the AFR as an option to log in the list. Tick it to enable.
You will also need to click on Capture Options then Pause Data Capture to start the capture. To create a log file you need to click Log Data to File from the Logging menu. This will create a log file in the directory defined as the Logging Directory, which is set through Choose Logging Directory from the Logging menu.
I don't think there is any special setup needed for an LM-1, it should just plug in and work. There was a bug in the ecuedit version I tested though and I couldn't get the AFR to display properly. epifan has released a fix but I haven't had a chance to test it. Don't know about the LC-1.