Page 1 of 1

can't log my 07 wrx help

PostPosted: Wed Nov 11, 2009 4:44 am
by kjc227
has anyone had a problem logging with 2.0 cable using romraider cause can't seem to log my 07 wrx can any one help?? it says unable to send ecu init or check cable is connected or ecu id unknown can't get pass that can any one help???

Re: can't log my 07 wrx help

PostPosted: Tue Nov 24, 2009 3:26 am
by pavlik1
YES I have the same problem, but unfortunately have no solution

I hope the designer of OP2.0 can give some support

Re: can't log my 07 wrx help

PostPosted: Mon Nov 30, 2009 1:17 am
by mohammadov
Check Com port firstly.
right click on My Computer-->Properties-->Device Manager-->Ports(COM & LPT) u can see clearly what port is the OP2..then go to RomRaider Logger, and choose the com port from the list.
u should also run it as administrator if u are using vista.
and u must dedicate the logger definitions from romraider website.

Re: can't log my 07 wrx help

PostPosted: Tue Dec 01, 2009 2:16 am
by pavlik1
all done,

I try it one more time and post the result