Hi guys,
I'm really stumped - tried everything from installing a fresh version of ECUExplorer and ECUFlash on a clean laptop, connected the green under-dash connector, and I still can't get any readings from the ECU, in ECUExplorer or ECUFlash.
In ECU Explorer I get the following error repeating several times a second in the logs:
23:23:08.390 - Comms Error - Write [WriteFile] : 6 [0x6]
23:23:08.390 - [QueryECUType] write [4102] returned less than buffer length [6]
23:23:08.390 - QueryECUType failed with 4112 [0x1010]
23:23:08.406 - --> 80 10 F0 01 BF 40
In ECU Flash, if I select the wrong type of ECU for reading (04-05 USDM), it reads the following then stops:
[02:44:54.527] ssm2_init
[02:44:54.687] ECU ID is 3D FFFFFFA4 58 30 05
[02:44:54.697] ssm2_cmd_0x81
Since my car is an 02 USDM wagon, that is really baffling.
Please help me out, this is really frustrating. I don't see any reason why this shouldn't be working...
Thanks