monsta11 wrote:In the end I chopped the connector off past the heatshrink so that there is only one black cable.
I then attached it to the the pin on our white connector that is green. It didnt make any difference if I connected to the odb pin 1 as well.
I was only able to download using the Evo 9 kernel.
unfortunately, its note working on the Outlander Turbo!
I'm geting this when it start to download:
[00:08:12.203] sending init sequence 1 (0001)
[00:08:15.421] sending init sequence 1 (0003)
[00:08:18.640] sending init sequence 1 (FFFF)
[00:08:21.859] sending init sequence 1 (7777)
[00:08:25.093] sending init sequence 1 (7778)
[00:08:28.328] sending init sequence 1 (F0F0)
[00:08:31.046] no response to any known code
and that's it!
I hope that the H8 kernel that is almost done will do the job for the MH8202F of the Outlander Turbo?
As many, many people in Europe are waiting so long for a solution...