ECUFlash can work with Mitsubishi Outlander?

User topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

Dyno Chart and wide band lambda

Postby christian_piasini » Wed Dec 06, 2006 11:55 pm

Sorry, I forget.........


the dyno chart....


Chris
Attachments
Dyno Chart.JPG
Dyno Chart.JPG (185.56 KiB) Viewed 8804 times
christian_piasini
 
Posts: 101
Joined: Sat Nov 25, 2006 8:50 am
Location: Italy

Outlander 2.0 Turbo done

Postby christian_piasini » Wed Jul 11, 2007 1:03 pm

Hi @ all, finaly the Outlander Flashing is done!

READ/WRITE of the MH8202F

regards

Christian Piasini
R&D Piasiniengineering

www.piasiniengineering.it
Attachments
outlander turbo.hex
(512 KiB) Downloaded 926 times
outlander 20T_reading.jpg
outlander 20T_reading.jpg (72.99 KiB) Viewed 8673 times
christian_piasini
 
Posts: 101
Joined: Sat Nov 25, 2006 8:50 am
Location: Italy

Postby RanEvo » Thu Jul 12, 2007 3:54 am

Hello Piasini,

are you going to share with us the software? :)
RanEvo
 
Posts: 23
Joined: Wed Jul 05, 2006 4:48 am

Hi @ all

Postby christian_piasini » Mon Oct 08, 2007 7:28 am

Here our dyno chart on the Outlander 2.0 Turbo.

removed speelimit
Higer rpm limiter
changed overboost valve

pressure drop 1.45 boost and 1.2 full rpm.

best regards

Christian Piasini
R&D Piasiniengineering

www.piasiniengineering.it
Attachments
Outlander 20Turbo_202HP.jpg
Outlander 20Turbo_202HP.jpg (211.89 KiB) Viewed 8576 times
christian_piasini
 
Posts: 101
Joined: Sat Nov 25, 2006 8:50 am
Location: Italy

Postby DarkECU » Mon Oct 08, 2007 8:35 am

this soft has been very expensive price
at the moment it can flash with cheaper tool than that
DarkECU
 
Posts: 25
Joined: Tue Apr 25, 2006 12:01 am

look at this... ;-)

Postby christian_piasini » Mon Oct 08, 2007 11:19 am

This is to show was removed the stock speedlimiter at 210Km/h!

have to know also what to do!


Christian Piasini
R&D Piasiniengineering

www.piasiniengineering.it
Attachments
Speed testing2.jpg
Speed testing2.jpg (261.19 KiB) Viewed 8559 times
Speed testing.jpg
Speed testing.jpg (1.38 MiB) Viewed 8569 times
christian_piasini
 
Posts: 101
Joined: Sat Nov 25, 2006 8:50 am
Location: Italy

Re: look at this... ;-)

Postby xor » Mon Oct 08, 2007 11:34 pm

christian_piasini wrote:This is to show was removed the stock speedlimiter at 210Km/h!

have to know also what to do!


Christian Piasini
R&D Piasiniengineering

www.piasiniengineering.it

Maybe you better buy ads on this site, it would help more then screenshots without any usable information for the community.
xor
 
Posts: 19
Joined: Sat Jan 13, 2007 10:13 am

Postby RanEvo » Tue Oct 09, 2007 12:16 am

DarkECU wrote:this soft has been very expensive price
at the moment it can flash with cheaper tool than that


What tool can flash at this time the Outlander Turbo - by this time the EcuFlash can do it? :?:
RanEvo
 
Posts: 23
Joined: Wed Jul 05, 2006 4:48 am

Answer To Xor (see i don't know your name)

Postby christian_piasini » Tue Oct 09, 2007 12:33 am

Hei guy, i'm the first post there the dyno chart, the picture of the ecu, and the stock hex too of the Outalnder 2.0 T!!!!!

I think you have to give something to the comunity!!!!!!!!!

NOT me.................... ;-)

cheers

Christian Piasini


This is to show was removed the stock speedlimiter at 210Km/h!

have to know also what to do!


Christian Piasini
R&D Piasiniengineering

www.piasiniengineering.it

Maybe you better buy ads on this site, it would help more then screenshots without any usable information for the community.
christian_piasini
 
Posts: 101
Joined: Sat Nov 25, 2006 8:50 am
Location: Italy

Re: RANEVO

Postby 0xyGen » Mon Oct 13, 2008 12:23 pm

KenYong3671 wrote:Hi RANEVO,

as for ur problem..i have found a solution for it.

initially, i have the same issue as u when i tried to read from the MIT Airtrek which is i think similliar to u problem.

just jumper the two wire from the openport wire white connector to the seconf init connector at ur car. and the third one to the pinj 1 of the ODBII of ur car. It works for me.

Hope u are able to get it.



pls share a another photo or diagrom for wiring ?
0xyGen
 
Posts: 8
Joined: Mon May 28, 2007 2:12 am

Previous

Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 15 guests

cron