bench recovery flash problem

User topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

bench recovery flash problem

Postby fbrs » Thu Sep 08, 2011 12:29 am

hello everyone
guys i'm trying to benchflash / unlock a evo X ecu with terrible ecutek tune but it seems that i'm doing something wrong in the process...
with the alternative flash box checked in the ecuflash options i can write and read (really slow) the stock rom that i'm trying to load to the ecu, but when i uncheck the box and try to flash the rom again as stated in the instructions, i still can't get into the ecu like its still locked or something....

[23:43:14.199] J2534 API Version: 04.04
[23:43:14.199] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[23:43:14.199] Device Firmware Version: 1.11.3157
[23:43:19.387] -- loading kernel --
[23:43:19.387] -- connecting to kernel --
[23:43:19.388] kernel get version
[23:43:20.204] interface close
[23:43:20.217] interface close

after a lot of tryies the best it came out is

[01:41:20.249] J2534 API Version: 04.04
[01:41:20.249] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[01:41:20.249] Device Firmware Version: 1.11.3157
[01:41:23.069] -- loading kernel --
[01:41:23.069] -- connecting to kernel --
[01:41:23.069] kernel get version
[01:41:23.397] ECU HW part number : 1860A981
[01:41:23.412] ECU SW part number : 1860A98101
[01:41:23.428] -- unlocking ECU --
[01:41:23.428] starting session...
[01:41:23.444] requesting seed...
[01:41:24.005] interface close
[01:41:24.021] interface close

so still no luck.....

Help please...
fbrs
 
Posts: 1
Joined: Thu Sep 08, 2011 12:24 am

Re: bench recovery flash problem

Postby radsdau » Thu Sep 08, 2011 2:59 pm

If it's EcuTeK it's almost certainly locked.
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm


Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 14 guests