help unable to read 05 sti
Posted: Tue Jun 21, 2011 10:26 pmHi guys,
I have a customer who had a cobb accessport installed on his car but then the cobb broke. He installed more parts since then and hit me up to do the retune on the vehicle. I am in test mode and trying to connect but i keep getting these error messages.
[20:11:29.934] flashing tool "shaudmode" loaded.
[20:11:29.934] flashing tool "subarucan" loaded.
[20:11:29.934] flashing tool "mitsucan" loaded.
[20:17:25.580] J2534 API Version: 04.04
[20:17:25.580] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[20:17:25.580] Device Firmware Version: 1.10.2658
[20:17:35.228] kernel get version
[20:17:35.583] SSM2 init
[20:17:35.731] SSM2 ECU ID is 2E 12 49 51 06
[20:17:35.812] Requesting Seed...
[20:17:35.857] Sending Key...
[20:17:35.902] interface close
[20:17:35.913] interface close
[20:17:47.593] J2534 API Version: 04.04
[20:17:47.593] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[20:17:47.593] Device Firmware Version: 1.10.2658
[20:18:02.058] kernel get version
[20:18:02.413] SSM2 init
[20:18:02.560] SSM2 ECU ID is 2E 12 49 51 06
[20:18:02.642] Requesting Seed...
[20:18:02.686] Sending Key...
[20:18:02.732] interface close
[20:18:02.743] interface close
[20:18:51.726] J2534 API Version: 04.04
[20:18:51.727] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[20:18:51.727] Device Firmware Version: 1.10.2658
[20:18:59.885] kernel get version
[20:19:00.240] SSM2 init
[20:19:00.388] SSM2 ECU ID is 2E 12 49 51 06
[20:19:00.470] Requesting Seed...
[20:19:00.515] Sending Key...
[20:19:00.561] interface close
[20:19:00.572] interface close
If the car currently has Cobb loaded am I unable to flash this ecu? I am going to do a search after this so please dont flame me. I am working on a tight deadline so i figured throw it out there while i search.
The fans are cycling and lights are blinking so i figure i am in test mode and i hit the enter key right after turning the key to ign on.
please help and thanks in advance,
I have a customer who had a cobb accessport installed on his car but then the cobb broke. He installed more parts since then and hit me up to do the retune on the vehicle. I am in test mode and trying to connect but i keep getting these error messages.
[20:11:29.934] flashing tool "shaudmode" loaded.
[20:11:29.934] flashing tool "subarucan" loaded.
[20:11:29.934] flashing tool "mitsucan" loaded.
[20:17:25.580] J2534 API Version: 04.04
[20:17:25.580] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[20:17:25.580] Device Firmware Version: 1.10.2658
[20:17:35.228] kernel get version
[20:17:35.583] SSM2 init
[20:17:35.731] SSM2 ECU ID is 2E 12 49 51 06
[20:17:35.812] Requesting Seed...
[20:17:35.857] Sending Key...
[20:17:35.902] interface close
[20:17:35.913] interface close
[20:17:47.593] J2534 API Version: 04.04
[20:17:47.593] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[20:17:47.593] Device Firmware Version: 1.10.2658
[20:18:02.058] kernel get version
[20:18:02.413] SSM2 init
[20:18:02.560] SSM2 ECU ID is 2E 12 49 51 06
[20:18:02.642] Requesting Seed...
[20:18:02.686] Sending Key...
[20:18:02.732] interface close
[20:18:02.743] interface close
[20:18:51.726] J2534 API Version: 04.04
[20:18:51.727] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[20:18:51.727] Device Firmware Version: 1.10.2658
[20:18:59.885] kernel get version
[20:19:00.240] SSM2 init
[20:19:00.388] SSM2 ECU ID is 2E 12 49 51 06
[20:19:00.470] Requesting Seed...
[20:19:00.515] Sending Key...
[20:19:00.561] interface close
[20:19:00.572] interface close
If the car currently has Cobb loaded am I unable to flash this ecu? I am going to do a search after this so please dont flame me. I am working on a tight deadline so i figured throw it out there while i search.
The fans are cycling and lights are blinking so i figure i am in test mode and i hit the enter key right after turning the key to ign on.
please help and thanks in advance,