unable to read rom file on evo 6 and 7

User topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

unable to read rom file on evo 6 and 7

Postby autoworx » Mon Jun 20, 2011 9:54 pm

Hi everyone.

I have a tatrix openport 2.0 , have done a dozen or so evo's from 6-10 with no problems so far .

I have a JDM evo 6 and JDM evo 7 which both can't be read by ecuflash.

The 6 comes up with

[13:01:17.428] sending init sequence 2
[13:01:19.456] interface close

The 7 is similar , it tries 4 different sequences and gives up . On both cars evoscan works fine , can log data and check and clear error codes.

I have tried software version 1.43.3150 and 1.42.2595 . I have tried 2 different computers , one a totally fresh install . Both have fresh batteries . I have tried the reflash cable connected and unconnected on the 7 , the 6 has no reflash connector port.

Really stumped ! I dont have any other evos to test this on right now , but It was working fine on a dozen previous evos.

any help appreciated!
autoworx
 
Posts: 2
Joined: Mon Jun 20, 2011 9:47 pm

Re: unable to read rom file on evo 6 and 7

Postby autoworx » Mon Jun 20, 2011 10:17 pm

forgot to add I have tried ecu unlocker , no luck . I have even tried connecting to the battery on a running car to get 14v.
autoworx
 
Posts: 2
Joined: Mon Jun 20, 2011 9:47 pm

Re: unable to read rom file on evo 6 and 7

Postby ptharris » Sat Jul 02, 2011 8:47 pm

autoworx wrote:forgot to add I have tried ecu unlocker , no luck . I have even tried connecting to the battery on a running car to get 14v.

Where are you located?
ptharris
 
Posts: 55
Joined: Fri Mar 06, 2009 7:34 pm


Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 8 guests