Can't read 2006 JDM Forester ROM

User topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

Can't read 2006 JDM Forester ROM

Postby ecktt » Fri May 13, 2011 2:48 pm

After connecting the green clips, bridging the 2 connectors, OP 1.3 and 2.0 and trying every read method in for Subaru with ecuflash_1422595 I still can't read the ROM. I tried with 3 different Forestors with the same result. I can read my Evo 7 and most other Subarus just fine but these Forestors just don't want to play nice. Any help getting them to read would be appreciated. I also tried beta version of ECUFlash but that would just break communication with all Subarus.
ecktt
 
Posts: 1
Joined: Fri Jan 29, 2010 9:04 am

Re: Can't read 2006 JDM Forester ROM

Postby radsdau » Sun May 15, 2011 3:48 pm

Is the car going into test mode? If not there may be a second set of green test mode connectors, although I haven't seen that on a Forester.
Have you tried both 05sti and 06sti flash methods? This car shouldn't be a problem for any version of ECUFlash newer than about 2 years old.
It's also possible the ECU is locked; has it been aftermarket tuned?
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm

Re: Can't read 2006 JDM Forester ROM

Postby Sasha_A80 » Sun May 15, 2011 10:04 pm

ecuFlash is out of help If you have Denso AG572 ecu (Forester JDM MY02-MY05).
Sasha_A80
 
Posts: 102
Joined: Sun Aug 31, 2008 3:04 am
Location: Saratov, Russia

Re: Can't read 2006 JDM Forester ROM

Postby radsdau » Mon May 16, 2011 4:14 pm

Ahhh yes of course, I didn't even think this wasn't FXT. My bad.
Denso ECUs only.
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm


Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 5 guests