Evo 6.5 Makinen Reflash

User topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

Evo 6.5 Makinen Reflash

Postby Tweakit » Tue Feb 22, 2011 9:17 pm

Hello anyone who can help me ... We have an EVO 6.5 Rally car that we are getting ready to do Targa Tasmania in this year... I have the latest version of ECUFlash and EVOScan. I also have both the 1.3 and 2.0 Versions of the OpenPort cables.
I have done heaps of 8 and 9 flashes in the past no issues... this is the first 6.5 we have done.
Initially I was able to read the hex file from the ECU but had no definitions for it.. After upgrading to the latest ECUFlash I was able to Read from it (used the 2.0 cable) and write the same file back to it... worked fine. Now I cannot read from it or write to it... Just trying to put my modified file back into the damn thing but somthing isnt right now.
It reads ..
sent init sequence 2
Error Timeout

I tried going back to the 1.3 cable and same deal ... went a bit further but still had an error.

Has anyone seen this before ... any tips on what I need to do to get it working again.

My EVOScan software still works with it fine ... just ECUFlash is not happy.

Any help greatly appreciated
Tweakit
 
Posts: 4
Joined: Thu Nov 16, 2006 12:04 am
Location: Sydney, Australia

Re: Evo 6.5 Makinen Reflash

Postby radsdau » Tue Feb 22, 2011 11:21 pm

Are you using the second ECUFlash 1.43 Beta? It's available from the EVOScan site. I believe it had some fixes for those ECUs over the first beta.
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm

Re: Evo 6.5 Makinen Reflash

Postby Tweakit » Wed Feb 23, 2011 1:07 pm

No I was using the 1.42.2595 version.
I will install the 1.43 version and see how I go ... I will post my results.
Thanks for the tip
Tweakit
 
Posts: 4
Joined: Thu Nov 16, 2006 12:04 am
Location: Sydney, Australia

Re: Evo 6.5 Makinen Reflash

Postby Tweakit » Wed Feb 23, 2011 1:39 pm

Thank-you very much ... I just upgraded to the 1.43 and it worked again no worries.
Thanking you.

No to make this thing fast for Targa Tasmania!
Tweakit
 
Posts: 4
Joined: Thu Nov 16, 2006 12:04 am
Location: Sydney, Australia

Re: Evo 6.5 Makinen Reflash

Postby radsdau » Wed Feb 23, 2011 3:02 pm

All the best; which car are we looking out for?
radsdau
 
Posts: 674
Joined: Wed Feb 08, 2006 6:56 pm


Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 9 guests