2002 edm sti

[hammy]

right i have a 2002 edm sti tactrix 2.0 cable and jumper block

when i try to read the ecu it just comes up with error i know the car is in test mode because the fans keep cycling and i have tried pushing the ok button before i put the key in the on postion and right after it but no differnce her is a copy of my log any help please because its really bugging me now as i have a boost problem that needs fixed asap and i know the cable is fine because i can use rom logger no problems cheers

[02:12lash Version 1.41.2483
[02:12:10.456] OS Version Windows XP
[02:12:10.456] Qt Version 4.4.0
[02:12:10.496] 26 memory models read.
[02:12:10.496] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[02:12:16.996] 342 ROM metadata models scanned.
[02:12:16.996] checksum module "subarudbw" loaded.
[02:12:16.996] checksum module "mitsucan" loaded.
[02:12:16.996] flashing tool "wrx02" loaded.
[02:12:16.996] flashing tool "wrx04" loaded.
[02:12:16.996] flashing tool "sti04" loaded.
[02:12:16.996] flashing tool "sti05" loaded.
[02:12:16.996] flashing tool "mitsukernel" loaded.
[02:12:16.996] flashing tool "mitsukernelocp" loaded.
[02:12:16.996] flashing tool "mitsubootloader" loaded.
[02:12:16.996] flashing tool "shbootmode" loaded.
[02:12:17.016] flashing tool "shaudmode" loaded.
[02:12:17.016] flashing tool "subarucan" loaded.
[02:12:17.016] flashing tool "mitsucan" loaded.
[02:12:58.726] J2534 API Version: 04.04
[02:12:58.726] J2534 DLL Version: 0.50.2464 Jan 29 2009 10:58:58
[02:12:58.726] Device Firmware Version: 1.06.2536
[02:13:12.115] denso02_bootloader_cmd_start
[02:13:13.337] denso02_bootloader_cmd_start
[02:13:14.569] denso02_bootloader_cmd_start
[02:13:15.800] denso02_bootloader_cmd_start
[02:13:17.012] denso02_bootloader_cmd_start
[02:13:17.423] kernel get version
[02:13:17.753] interface close
[02:13:17.773] interface close