Page 1 of 1

2005 LGT - ECUFlash won't work (Vista, Tatrix 2.0)

PostPosted: Tue May 26, 2009 6:00 pm
by caramall2
ECUFlash 1.41. Test connectors are connected. I tried on my XP laptop and it didn't work. Then tried a Vista laptop. I chose "2005-2006 Subaru DBW FXT/OBXT/LGT" for the model. Here's what I got:

[20:26:00.338] EcuFlash Version 1.41.2483
[20:26:00.338] OS Version Windows Vista
[20:26:00.338] Qt Version 4.4.0
[20:26:00.364] 26 memory models read.
[20:26:00.366] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[20:26:04.962] 342 ROM metadata models scanned.
[20:26:04.962] checksum module "subarudbw" loaded.
[20:26:04.962] checksum module "mitsucan" loaded.
[20:26:04.963] flashing tool "wrx02" loaded.
[20:26:04.963] flashing tool "wrx04" loaded.
[20:26:04.963] flashing tool "sti04" loaded.
[20:26:04.963] flashing tool "sti05" loaded.
[20:26:04.964] flashing tool "mitsukernel" loaded.
[20:26:04.964] flashing tool "mitsukernelocp" loaded.
[20:26:04.964] flashing tool "mitsubootloader" loaded.
[20:26:04.964] flashing tool "shbootmode" loaded.
[20:26:05.000] flashing tool "shaudmode" loaded.
[20:26:05.001] flashing tool "subarucan" loaded.
[20:26:05.002] flashing tool "mitsucan" loaded.
[20:26:44.671] J2534 API Version: 04.04
[20:26:44.671] J2534 DLL Version: 0.50.2464 Jan 29 2009 10:58:58
[20:26:44.671] Device Firmware Version: 1.05.2463
[20:26:49.989] kernel get version
[20:26:50.348] SSM2 init
[20:26:50.766] SSM2 init
[20:26:51.184] SSM2 init
[20:26:51.602] SSM2 init
[20:26:52.020] SSM2 init
[20:26:52.438] SSM2 init
[20:26:52.857] SSM2 init
[20:26:53.276] SSM2 init
[20:26:53.694] SSM2 init
[20:26:54.111] SSM2 init
[20:26:54.629] interface close
[20:26:54.641] interface close


If you have tips for XP too, I'd like to get that laptop working too...it doesn't even get past the inital screen where I can even try to read the ECU.