I am trying to flash a 2002 WRX ECU back to stock with a stock ROM.
OpenPort 1.3 cable
ECUflash 1.41
For what it's worth, the logger in RomRaider 0.5.2b for Windows can connect to my ECU... once I selected COM4.
When I connect the green connectors under the dash, turn ignition to ON, and fire up ECUflash to test flash the ROM, I only get the following:
- Code: Select all
[18:54:56.612] EcuFlash Version 1.41.2483
[18:54:56.612] OS Version Windows XP
[18:54:56.612] Qt Version 4.4.0
[18:54:56.612] 26 memory models read.
[18:54:56.612] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[18:54:56.737] 342 ROM metadata models scanned.
[18:54:56.737] checksum module "subarudbw" loaded.
[18:54:56.737] checksum module "mitsucan" loaded.
[18:54:56.737] flashing tool "wrx02" loaded.
[18:54:56.737] flashing tool "wrx04" loaded.
[18:54:56.737] flashing tool "sti04" loaded.
[18:54:56.737] flashing tool "sti05" loaded.
[18:54:56.737] flashing tool "mitsukernel" loaded.
[18:54:56.737] flashing tool "mitsukernelocp" loaded.
[18:54:56.737] flashing tool "mitsubootloader" loaded.
[18:54:56.737] flashing tool "shbootmode" loaded.
[18:54:56.737] flashing tool "shaudmode" loaded.
[18:54:56.737] flashing tool "subarucan" loaded.
[18:54:56.737] flashing tool "mitsucan" loaded.
[18:55:04.769] A4SGD10C (332 tables) inheriting 16BITBASE (495 tables)
[18:55:04.800] A4SGE01C (3 tables) inheriting A4SGD10C (495 tables)
[18:55:04.831] 163840 byte image read.
[18:55:08.394] Using interface OpenPort 1.3 Subaru TX45akXJ0e84f6d5f39ef0d1c7c4c4a625ac762852c395e3
[18:55:10.472] denso02_bootloader_cmd_start
[18:55:11.706] denso02_bootloader_cmd_start
[18:55:12.940] denso02_bootloader_cmd_start
[18:55:14.159] denso02_bootloader_cmd_start
[18:55:15.394] denso02_bootloader_cmd_start
[18:55:15.831] kernel get version
[18:55:16.159] interface close
[18:55:16.159] interface close
I was unable to find a place to specify COM4 in ECUflash (?)