openecu.org

Forums for ECU reverse engineering and modification

Skip to content

Unable to read programming voltage?

User topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

Post a reply

Postby qbanrex » Fri May 18, 2007 4:56 pm

Was this problem ever solved ???? I am expriencing the same problem now... HELP :cry:
qbanrex
 
Posts: 2
Joined: Thu Apr 12, 2007 8:29 am
Location: Miami
Top

Postby Hyper » Sat May 19, 2007 4:31 pm

me too
Hyper
 
Posts: 51
Joined: Mon Jul 11, 2005 7:38 pm
Top

Postby fljason » Fri Jun 01, 2007 4:20 pm

im having the same problem anyone get a fix yet
fljason
 
Posts: 12
Joined: Wed Jul 05, 2006 7:23 pm
Top

Postby fljason » Fri Jun 01, 2007 4:20 pm

im having the same problem anyone get a fix yet
fljason
 
Posts: 12
Joined: Wed Jul 05, 2006 7:23 pm
Top

Postby PRR_INC » Fri Sep 28, 2007 6:34 am

Same issue here. on an 02 WRX. Used to flash fine, now it can't read the voltage. Will check the connector voltage and reset the ECU via power off and report back.

Is there a way to test the Tactrix (sp?) cable off the car by providing 12v to the correct pins and testing the voltage via software?

Jason
PRR_INC
 
Posts: 2
Joined: Mon Feb 26, 2007 7:03 am
Top

Postby PRR_INC » Mon Oct 01, 2007 8:54 am

Turns out I've been a complete sped. Was attempting to use the ecuflash embedded into an old version of Ecu Explorer. Used an updated version of ecu flash and it worked just fine.

Jason
PRR_INC
 
Posts: 2
Joined: Mon Feb 26, 2007 7:03 am
Top
Previous
Post a reply

Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 15 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Time : 0.147s | 13 Queries | GZIP : Off