cant connect to 04 STI

User topics relating to software that reflashes or modifes ECU code and data

Moderator: Freon

cant connect to 04 STI

Postby taylor » Fri Jan 09, 2009 10:11 am

[10:19:54.156] Using interface OpenPort 1.3 Subaru TX47pPN81aecb4d9a1d6a8225f564f84f5bcfdacbaef2534
[10:19:55.671] kernel get version
[10:19:56.062] SSM2 init
[10:19:56.218] SSM2 ECU ID is 2E 12 49 53 06
[10:19:56.296] Requesting Seed...
[10:19:56.343] Sending Key...
[10:19:56.390] interface close
[10:19:56.390] interface close

keep getting this error.. any help?

green connector connected, no other clip for the plugs.
taylor
 
Posts: 3
Joined: Fri Jan 09, 2009 10:02 am

Re: cant connect to 04 STI

Postby AlGontsov » Wed Jan 14, 2009 12:55 am

You must press the read button before starting of fans, i.e. within first 1-2 seconds.
Also you may try to find another connectors or reading-flashing method.
AlGontsov
 
Posts: 35
Joined: Sun May 18, 2008 5:47 am

Re: cant connect to 04 STI

Postby Xisoka » Thu Jul 16, 2009 2:41 am

I have the same problem with JDM STi 2006...
unable to connect.
Xisoka
 
Posts: 1
Joined: Wed Jul 15, 2009 8:35 am

Re: cant connect to 04 STI

Postby luizguccione » Fri Oct 09, 2009 6:35 pm

I have the same problem. I've tested on 4 JDM Imprezas. 1 WRX and 3 STIs. Cannot read ecu with EcuFlash. When reading from my 02 USDM WRX, everything works great (read, flash, log).
luizguccione
 
Posts: 3
Joined: Thu Oct 08, 2009 8:08 am


Return to Reflashing Software

Who is online

Users browsing this forum: No registered users and 9 guests

cron