I have Ecuflash 1.4 installed, using OpenPort 2.0 tactrix cable, followed the steps to the T, including connecting the green connectors for test mode. I've installed/reinstalled twice and I still get the following error message:
[21:28:34.671] Version 1.40.2178
[21:28:34.671] 19 memory models read.
[21:28:34.671] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[21:28:34.796] 319 ROM metadata models scanned.
[21:28:34.796] checksum module "subarudbw" loaded.
[21:28:34.796] flashing tool "wrx02" loaded.
[21:28:34.796] flashing tool "wrx04" loaded.
[21:28:34.796] flashing tool "sti04" loaded.
[21:28:34.796] flashing tool "sti05" loaded.
[21:28:34.796] flashing tool "mitsukernel" loaded.
[21:28:34.796] flashing tool "mitsukernelocp" loaded.
[21:28:34.796] flashing tool "shbootmode" loaded.
[21:28:34.796] flashing tool "shaudmode" loaded.
[21:28:34.796] flashing tool "subarucan" loaded.
[21:28:46.187] J2534 error [ERR_SUCCESS].
[21:28:46.187] unable to connect to vehicle interface.
[21:28:46.187] interface close
Is it the cable that is faulty? Am I doing something wrong? is there not enough battery power? The car is bone stock btw; no previous tunes.
Help me out fellas.