EcuFlash press read ecu > soft hangs (freezes)...

[EvoXtrem]

I installed Ecuflash with success on new PC,
but after I select the car and press read ecu, it goes no response, EcuFlash hangs (freezes)…
No message or logs... Just process EcuFlash at 100% CPU …

What is this or what am I doing wrong?

EcuFlash Version 1.39.2152
Openport 1.3

Thanks

[rockjock]

if you're looking to read the X rom...its a no go still.

[EvoXtrem]

No, the problem it’s only for read rom, the prompt with list of cars, Mitsubishi cars selected, press reading and system failing… CPU 100% and not response (Win XP)...

[EvoXtrem]

After several tests, I found that the problem is recent versions of EcuFlash…

If I install the version 129 of EcuFlash, it works perfectly

Solution; Edit with 140 and Flash with the version 129 of EcuFlash...

Another solution?