problem connecting to 06 wrx, flashed previously

[spartan]

Ok I have big problem. I just installed my helix catted downpipe and I am trying to flash a stage 2 map onto my car. I have flashed my car before so I know how to do it. This time however I am getting an error and it is not working. I have uninstalled and re-installed with no sucess. Here is what I am getting.

[12:29:15.009] Version 1.35.1650 [12:29:15.019] 11 memory models read.
[12:29:15.019] scanning for metadata models in C:/Documents and Settings/Travis Gibbs/Desktop/WRX Tuning Tools/EcuFlash/rommetadata
[12:29:15.189] 234 ROM metadata models scanned.
[12:29:15.189] checksum module "subarudbw" loaded.
[12:29:15.189] flashing tool "wrx02" loaded.
[12:29:15.189] flashing tool "wrx04" loaded.
[12:29:15.189] flashing tool "sti04" loaded.
[12:29:15.189] flashing tool "sti05" loaded.
[12:29:15.189] flashing tool "mitsukernel" loaded.
[12:29:15.189] flashing tool "mitsukernelocp" loaded.
[12:29:15.189] flashing tool "shbootmode" loaded.
[12:29:26.145] Using interface OpenPort 1.3 Subaru TX48A8wd7c9774d51d1988f9a6be83e13ee17b47802c71d6
[12:29:34.627] SSM2 init
[12:29:34.797] SSM2 ECU ID is 43 12 58 41 06
[12:29:34.927] Requesting Seed...
[12:29:35.007] Sending Key...
[12:29:35.688] interface close
[12:29:35.708] interface close


Please help ASAP as I don't want to drive the car until I have flashed this new map.

Thanks

[06STi]

I get the same thing. I have tried a few differant things and still cant seem to get it to work. I found a older verson I have been using in the mean time.

[radsdau]

I've seen that symptom when the test mode connectors are not connected properly. Double check that.

[spartan]

06 is DBW there are no test connectors. Anyone else?

[Jon [in CT]]

06 is DBW there are no test connectors.

Yes, there are.

[spartan]

OMG I am an idiot. Thanks for reminding me...