I have connected the green connectors under the OBD-II connecter,
and followed the instructions selecting a Subaru DBW models STi/FXT/LGT/Baja.
Heres what I get in Ecuflash:
[14:27:49.750] Version 1.33.1426
[14:27:49.750] 11 memory models read.
[14:27:49.750] scanning for metadata models in D:/EcuFlash133/rommetadata
[14:27:50.265] 219 ROM metadata models scanned.
[14:27:50.265] checksum module "subarudbw" loaded.
[14:27:50.265] flashing tool "wrx02" loaded.
[14:27:50.265] flashing tool "wrx04" loaded.
[14:27:50.265] flashing tool "sti04" loaded.
[14:27:50.265] flashing tool "sti05" loaded.
[14:27:50.265] flashing tool "mitsukernel" loaded.
[14:27:50.265] flashing tool "mitsukernelocp" loaded.
[14:27:50.265] flashing tool "shbootmode" loaded.
[14:30:38.906] Using interface OpenPort 1.3 Universal TX275xNK10caf4d51934395d3bf7fd34e405a4f6e032007a
[14:30:45.375] SSM2 init
[14:30:45.812] SSM2 init
[14:30:45.984] SSM2 ECU ID is 2A 04 44 63 05
[14:30:45.984] SSM2 read ram byte addr: 000061
[14:30:46.046] ECU is in test mode
[14:30:46.156] SSM2 init
[14:30:46.312] SSM2 ECU ID is 2A 04 44 63 05
[14:30:48.468] interface close
[14:30:48.500] interface close
The error reads: 'an erros has occured. see log for details'
I tried all other options and some Version but all error.
I connected the white connectors but the same error.
Some Japanese having forester have the same problem.
Anyone have an idea?