openecu.org

by **06rexwagon** » Tue Oct 02, 2007 5:26 pm

Anyone successfully read a rom with 1.33? On 2 different 05 STi's and 2 different laptops it crashes and wants to send an error report as soon as I hit read.

by **ecuflasher** » Wed Oct 03, 2007 10:02 am

I have the same prob.

by **radsdau** » Wed Oct 03, 2007 10:54 pm

Works for me. Looks like the problems people have been having are related to the FTDI drivers.

When installing 1.33 I cancelled at the USB driver part.

by **Spec C Wannabe** » Thu Oct 04, 2007 5:31 pm

Mine failed at reading/writing Ecu from the instance that I hit read or write button.

I am not a computer geek so I don't know what's wrong with it....

Now I can't go back to older version and stucked with my tuning.

by **qoncept** » Sat Oct 06, 2007 12:29 pm

Happening here too. I tried first with my buddy's Vista box with a completely fresh install and using the packaged drivers. Then tried on XP laptop with 1.33 and the drivers I had from an old install.

by **ev8siv3** » Mon Oct 08, 2007 2:48 pm

Try this set of drivers.

by **Spec C Wannabe** » Mon Oct 08, 2007 10:12 pm

ev8siv3 wrote:Try this set of drivers.

Ok will try it tonight...

How to install and replace the old unworkable file?

Please give me the path.....

Thnx so much...

by **ev8siv3** » Tue Oct 09, 2007 7:26 am

Goto the windows control panel, uninstall all FTDI and tactrix drivers.
Reboot the computer.
Unarchive this attachment to its own folder. Go into the directory and install the drivers with DPinst.exe.

Then reboot again and insert your cable to try again.

by **06rexwagon** » Tue Oct 09, 2007 7:29 am

Where did these drivers come from?

by **ev8siv3** » Tue Oct 09, 2007 7:43 am

06rexwagon wrote:Where did these drivers come from?

A working installation back around 1.29 or 1.30 I believe. Check the timestamp on the files. It has been the only drivers that have worked properly for myself and many other people who have upgraded.

by **Paolino** » Thu Oct 11, 2007 6:10 am

I tried installing 1.28, 1.30 and 1.33 using all different driver combinations, including the ones in this thread. I am running Vista and trying to read my USDM 07 wrx rom.

by **Spec C Wannabe** » Thu Oct 11, 2007 6:13 am

I ended up using 1.3.0 from my thread below.

by **cboles** » Sun Oct 14, 2007 5:46 pm

I'm looking into it - I have removed all the drivers / software on my Vista machine, and I can't get it to reproduce the problem some of you are having with 1.33. Hopefully I can get a repro soon...

Colby

by **cboles** » Sun Oct 14, 2007 5:53 pm

I cleaned off an XP machine and it seems to work fine too with 1.33. Hmmm....

by **06rexwagon** » Sun Oct 14, 2007 7:00 pm

Try an old 1.2 cable

openecu.org

1.33 crashes when reading ecu

1.33 crashes when reading ecu

Who is online