2004 USDM Impreza WRX 5mt.
I have two stock ECU's for the car, an AH793 and AH794. The AH794 I purchased BRAND NEW myself, so I know its not previously flashed.
I also have an AF424 from an 02 WRX.
Working with all 3 ECUs, following all the directions/instructions i can find...still no worky.
Heres what I get in Ecuflash:
[14:21:34.633] Using interface OpenPort 1.3 Subaru TX45RVpq79cdf6d5980f25c809c689a46adde3e12744126c
[14:21:43.706] SSM2 read ram byte addr: 000061
[14:21:43.766] ECU is in test mode
[14:21:44.056] SSM2 init
[14:21:44.247] SSM2 ECU ID is 1B 14 40 06 05
The error reads: 'an erros has occured. see log for details'
Thats with the AF424 ECU.
The AH793 and AH794 ECU's do this:
[14:28:04.243] Using interface OpenPort 1.3 Subaru TX45RVpq79cdf6d5980f25c809c689a46adde3e12744126c
[14:28:07.648] SSM2 read ram byte addr: 000061
[14:28:09.771] unable to verify test mode
[14:28:10.001] SSM2 init
[14:28:10.172] SSM2 ECU ID is 2E 14 48 60 06
[14:28:10.312] Requesting Seed...
[14:28:10.402] Sending Key...
Then i get the same error message.
Anyone have an idea?