Page 1 of 1
ERROR 'flashing toos do not recognize flash method 'evo'
Posted:
Wed Jan 24, 2007 3:33 amby grayw
Hope someone can help?
I get the error below when I try and do a test write to 2004 VIII MR, have searched but been unable to find a solution.
flashing toos do not recognize flash method 'evo'
Posted:
Wed Jan 24, 2007 4:27 amby grayw
Found the answer in another post, but for reference the XML file needs modifing.
<xmlid>93660005</xmlid>
<internalidaddress>f52</internalidaddress>
<internalidhex>93660005</internalidhex>
<make>Mitsubishi</make>
<market>JDM</market>
<model>Lancer</model>
<submodel>EVO8 MR</submodel>
<transmission>Manual</transmission>
<year>2004</year>
<flashmethod>evo</flashmethod>
<memmodel>SH7052</memmodel>
Changed flashing method to:
<xmlid>93660005</xmlid>
<internalidaddress>f52</internalidaddress>
<internalidhex>93660005</internalidhex>
<make>Mitsubishi</make>
<market>JDM</market>
<model>Lancer</model>
<submodel>EVO8 MR</submodel>
<transmission>Manual</transmission>
<year>2004</year>
<flashmethod>mitsukernel</flashmethod>
<memmodel>SH7052</memmodel>
Posted:
Wed Jan 24, 2007 4:30 amby S54fan
Ah, when I did those xml files they were for v1.28, think the flashing method might have changed with 1.29?
Posted:
Wed Jan 24, 2007 11:43 amby 888
grayw wrote:Found the answer in another post, but for reference the XML file needs modifing.
<xmlid>93660005</xmlid>
<internalidaddress>f52</internalidaddress>
<internalidhex>93660005</internalidhex>
<make>Mitsubishi</make>
<market>JDM</market>
<model>Lancer</model>
<submodel>EVO8 MR</submodel>
<transmission>Manual</transmission>
<year>2004</year>
<flashmethod>evo</flashmethod>
<memmodel>SH7052</memmodel>
Changed flashing method to:
<xmlid>93660005</xmlid>
<internalidaddress>f52</internalidaddress>
<internalidhex>93660005</internalidhex>
<make>Mitsubishi</make>
<market>JDM</market>
<model>Lancer</model>
<submodel>EVO8 MR</submodel>
<transmission>Manual</transmission>
<year>2004</year>
<flashmethod>mitsukernel</flashmethod>
<memmodel>SH7052</memmodel>
Cheers for that just had the same problem, had to change it in 96260007 aswell before it would work.
Posted:
Thu Jan 25, 2007 6:42 amby C6ect.ect
With the v1.28 I had to tweek the software to recognize my 94620008 ECU ROM correctly and the stepper ROM was messed up.
But with the v1.29a all ROM is perfect but is being incorrectly recognized as 96260007 and once in awhile (on both computers) I get a XmlHandlerHelper sparse error and I have to reinstall from download the v1.29a
Whats this?