Need help : ECUFlash 1.29a ...

[Jeepstoke]

Hi (Sorry for my english),

I used ECUFlash since a year (with an older version) and all work fine. I try to install 1.29a (uninstall every driver and old ECUFlash version). And now I'm not able to use ECUFlash.

I got this in the "log" window :

[09:17:21.776] Version 1.29.906
[09:17:21.836] 8 memory models read.
[09:17:25.381] 140 ROM metadata models read.
[09:17:25.381] checksum module "subarudbw" loaded.
[09:17:25.381] flashing tool "wrx02" loaded.
[09:17:25.381] flashing tool "wrx04" loaded.
[09:17:25.381] flashing tool "sti04" loaded.
[09:17:25.381] flashing tool "sti05" loaded.
[09:17:25.381] flashing tool "mitsukernel" loaded.
[09:17:25.381] flashing tool "mitsukernelocp" loaded.
[09:17:25.381] flashing tool "mitsubootloader" loaded.
[09:17:54.744] unable to open OpenPort device [ Serial ].
[09:17:54.744] unable to connect to vehicle interface.

At the bottom right of ECUFlash I see "Cable <-> Serial"

Before to open ECUFlash for the first time, I plug the Cable in the usb and install the driver for it (contain in the ECUFlash directory).

Somebody have an answer?

Thanks!

[marky9074]

What does it say in control panel/system/hardware/device manager under ports? Should be:

OpenPort 1.3 Subaru (as Serial Port) (COM##)

Sounds like it is not installed correctly...

[Jeepstoke]

Hi

This is what I see :

USB serial port (COM5)

This is correct ?