Page 1 of 4
ECUFlash - Support for USDM 07 WRX?
Posted:
Sun Oct 29, 2006 6:14 pmby Jeramie
Just wondering if the USDM 07 WRX should be supported by ECUFlash. I tried to dump the image tonight and obviously it didn't work.
If it's not supported do you have a time frame of when it will be? Thnx
Posted:
Sun Oct 29, 2006 8:18 pmby merchgod
Someone dumped an 07 sti rom with Ecuflash.
Posted:
Mon Oct 30, 2006 5:25 amby Jeramie
I tried with my WRX and it woudln't even load the kernal?
Posted:
Mon Oct 30, 2006 7:33 amby merchgod
Do you get the radiator fans cycling?
Posted:
Mon Oct 30, 2006 9:03 amby Jeramie
yeah, cel and fan cycling
Posted:
Mon Oct 30, 2006 9:50 amby merchgod
Do what Braden talked about in that other post. Remove tactrix driviers (should be 4 of them) from add/remove programs. Remove Ecuflash from add/remove programs. Restart. Download 1.29a Ecuflash and install. Even if you previously installed 1.29a, you still need to follow this uninstall process.
Posted:
Mon Oct 30, 2006 11:54 amby Jeramie
Yeah I already did all that before bradens post. When first connecting 1.2 (I had 1.1 or 1.0 before) it wouldn't even find the cable. After reinstall (removed everything first of course) it will now find cable and Ecuexplorer works.
I have a log, of the flash process on my laptop. Will be posting it shortly.
Posted:
Tue Oct 31, 2006 12:20 pmby Jeramie
Heres the log.
Posted:
Tue Oct 31, 2006 12:25 pmby merchgod
If you have recently installed 1.29a and haven't tried it on anything except this 07 wrx, I would try it on non-07 just to verify it isn't a driver issue.
There's also be mention of a white connector on the passenger's side is sometimes disconnected from the factory that will cause the dl to fail. Not sure where exactly it is, though. Somewhere above the footwell.
Posted:
Tue Oct 31, 2006 12:35 pmby Jeramie
merchgod wrote:If you have recently installed 1.29a and haven't tried it on anything except this 07 wrx, I would try it on non-07 just to verify it isn't a driver issue.
There's also be mention of a white connector on the passenger's side is sometimes disconnected from the factory that will cause the dl to fail. Not sure where exactly it is, though. Somewhere above the footwell.
1.29a has worked in past with 04. ..
The white connector is looking like the culprit!(Now just to find it) Thanks for the help and suggestions Mechgod. I apreciate it!
Should also meantion ecuexplorer works just fine.
Posted:
Tue Oct 31, 2006 1:08 pmby merchgod
Ecuexplorer doesn't require diagnostics mode to operate, so it could very well be the elusive white connector issue.
Posted:
Tue Oct 31, 2006 1:46 pmby Jeramie
Got ya. But if ecuexplorer works, I would assume the drivers are ok!. Would you?
Does anyone know where (Which forum) they saw the post with the 07 STI with the funny white connectors?
Posted:
Wed Nov 01, 2006 2:11 amby zigzagzok
Jeramie wrote:Heres the log.
i have the same error for my 06 Legacy GT 6MT too...
Posted:
Wed Nov 01, 2006 4:31 amby Jeramie
Really?
Hummm. I found the thread from the 07 STI guy and PM'd him but no response yet
Thanks for the info.
Posted:
Wed Nov 01, 2006 11:44 pmby zigzagzok
Jeramie wrote:Really?
Hummm. I found the thread from the 07 STI guy and PM'd him but no response yet
Thanks for the info.
http://forums.openecu.org/viewtopic.php?t=1115
this is my thread showing the problem...