What is the deal with the immobilizer. I thought it was alphanumeric 4 digit. However EcuFlash pulls numeric 8801 for example. I will request the Immobilizer from another program and see if it differs.
Standby.
Immobilizer
Moderator: Freon
5 posts
• Page 1 of 1
Immobilizer
by TTPengineering » Fri Jul 07, 2006 8:08 am
- TTPengineering
- Posts: 6
- Joined: Mon Jun 19, 2006 7:03 pm
by TTPengineering » Fri Jul 07, 2006 8:15 pm
I pulled the immobilizer code with another flash utility and it read 0031. Ecuflash read 8801.
What is the conflict here? Is it pulling the wrong data?
I trust the other system I used as the correct code.
What is the conflict here? Is it pulling the wrong data?
I trust the other system I used as the correct code.
- TTPengineering
- Posts: 6
- Joined: Mon Jun 19, 2006 7:03 pm
by AutoXer » Sat Jul 08, 2006 8:27 am
TTPengineering wrote:I pulled the immobilizer code with another flash utility and it read 0031. Ecuflash read 8801.
What is the conflict here? Is it pulling the wrong data?
I trust the other system I used as the correct code.
Interesting...
I've compiled a little spreadsheet of codes that i've found floating around. I had hoped to find some repeated codes or some logic to them. I havn't found very much. However, of the 14 codes that I have, 7 of them have "01" as the second word. That is over half with the format 0x**01.
- AutoXer
- Posts: 44
- Joined: Thu Apr 13, 2006 3:27 am
by TTPengineering » Tue Jul 11, 2006 8:59 pm
It was a encryption from another flash program that was reading it as "encrypted" with the other program.
Got the "real" immobilizer code for the scrambled one and got the car running.
Got the "real" immobilizer code for the scrambled one and got the car running.
- TTPengineering
- Posts: 6
- Joined: Mon Jun 19, 2006 7:03 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests