error sending kernel size

OpenECU software executables and source code

Moderator: Freon

error sending kernel size

Postby jamk » Sat Oct 02, 2010 7:21 pm

Hello all!

I can't read flash at MMC Galant VR-4 JDM '97 (ECU part number MD340289, OP2.0 (also try OP1.3)). EcuFlash ver. 1.42, try 1.43 and result is same on a
two cars :(
Here is log for 1.42
fist car:
[13:53:37.546] sending init sequence 2
[13:53:37.546] got 0x10 response instead of 0x11
[13:53:37.546] sending init sequence 3
[13:53:37.921] entering bootloader
[13:53:37.921] sending kernel size (2027)
[13:53:37.921] error sending kernel size
[13:53:37.921] interface close

second car:
[19:31:43.437] Device Firmware Version: 1.10.3020
[19:31:45.390] sending init sequence 2
[19:31:45.390] got 0x09 response instead of 0x11
[19:31:45.390] sending init sequence 3
[19:31:45.765] entering bootloader
[19:31:45.765] sending kernel size (2029)
[19:31:45.781] error sending kernel size
[19:31:45.781] interface close

try 1.43 for first car:

[15:01:56.140] J2534 API Version: 04.04
[15:01:56.140] J2534 DLL Version: 1.00.3147 Sep 3 2010 00:11:07
[15:01:56.140] Device Firmware Version: 1.11.3137
[15:01:56.140] Device Serial Number: TA8ysPe9
[15:01:58.765] sending init sequence 2
[15:01:58.765] got 0x09 response instead of 0x11
[15:01:58.765] sending init sequence 3
[15:01:59.125] entering bootloader
[15:01:59.125] sending kernel size (2029)
[15:01:59.125] error sending kernel size
[15:01:59.140] interface close
[15:02:09.515] J2534 API Version: 04.04
[15:02:09.515] J2534 DLL Version: 1.00.3147 Sep 3 2010 00:11:07
[15:02:09.515] Device Firmware Version: 1.11.3137
[15:02:09.515] Device Serial Number: TA8ysPe9
[15:02:11.875] sending init sequence 2
[15:02:11.875] got 0x09 response instead of 0x11
[15:02:11.875] sending init sequence 3
[15:02:12.218] entering bootloader
[15:02:12.265] sending kernel size (1951)
[15:02:12.265] error sending kernel size
[15:02:12.281] interface close

On a my MMC Galant VR-4 '99 (ECU MD340288) read flash and write is no problem.
Any ideas why ?

Thanks
jamk
 
Posts: 4
Joined: Sat Oct 02, 2010 6:52 pm

Re: error sending kernel size

Postby Bruce Willis » Sun Dec 19, 2010 8:15 am

What CPU on this ECU? may be MH7201?
Bruce Willis
 
Posts: 58
Joined: Sat Jan 24, 2009 7:41 am
Location: Russia


Return to OpenECU Software

Who is online

Users browsing this forum: No registered users and 2 guests

cron