openecu.org

This is my first go around and I would like some input. this is the ROM info:

USDM OB XT 05 auto
Internal ID:A2WC511R
FlashMethod:sti05
MemoryModel:SH7058
ChecksumModule: subarudbw
Inherits:A2WC510C

I have been lurking about the forums and had heard a few things like using the STI throttle maps etc.... Where do we "get" the maps and what years are compatible? Is my ECU version an older one?

Is there a basic map reading section?
Target Boost A
Target Boost B
Why the two maps?

What is generally considered MAX boost on a stock motor?

Thanks ahead of time for such an amazing group of people!

Come on there has to be some experts out there to answer a few questions.

It's may be similar to high and low octane maps, you can make it the same
Try to make smooth changes from stock values at the low rpm and load to 2.0-2.2 boost, up to 80-90% wastegate duty, decrease AFR on 1,5-1 at middle and high load areas, add timng up to 10-12 degrees in same areas. And next get the time to drive and look to the logs, corrrect the knocks, e.g. temperature, etc.

AlGontsov wrote:It's may be similar to high and low octane maps, you can make it the same
Try to make smooth changes from stock values at the low rpm and load to 2.0-2.2 boost, up to 80-90% wastegate duty, decrease AFR on 1,5-1 at middle and high load areas, add timng up to 10-12...4-6 degrees in same areas. And next get the time to drive and look to the logs, corrrect the knocks, e.g. temperature, etc.

Thats what I was wondering, Thanks for the initial starting point.