openecu.org

Perhaps I do something wrong

How can I be sure that the open ECU software reads the rom definations
and what do you guys do when you have dowloaded the rom defination

I can download the ECU difinitions with no problem

But where or how to place theese difinitions so the open Ecu software
can use the difinitions

Here is the rom

that is the a2wc401f. This is supported by the latest Enginuity defs:

1. Download and install Enginuity 0.4.1b -> www.enginuity.org
2. Download, unzip and place the updated ecu defs 0.784b in the Enginuity main directory replacing the existing file -> http://www.enginuity.org/about360.html
3. Run Enginuity and open rom
4. When flashing with Ecuflash make sure the flashmethod tag in A2WC401F.xml is sti04 (ecuflash\rommetadata).

It works now , perfect

But when I look at the timing map it looks like a timing map for
an NA engine and not a turbo charged engine !!